Skip to main content
Schneider Electric LX1D2T6

Schneider Electric LX1D2T6 TeSys contactor coil

MPN LX1D2T6
Obsolete

Schneider Electric TeSys D LX1D2T6 contactor coil, 480 V AC 60 Hz, 70 VA inrush / 7.5 VA hold, 2304 Ohm coil resistance, for 9 to 18 A contactors.

$76.35 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1D2T6 specifications
ParameterValue
Control circuit typeAC 60 Hz
Main product or component typeContactor coil
Coil voltage480 V AC 60 Hz

Product details

What this coil does and where it fits

The LX1D2T6 is the replacement coil for a TeSys D contactor — specifically the 480 V AC 60 Hz variant that energises the 9 to 18 A frame. It is the part you swap when the original coil opens or shorts, not the whole contactor. That means the coil pulls in reliably between 384 V and 528 V at the terminals — useful when line voltage sags under load.

Coil electrical signature — inrush vs hold

Inrush power is 70 VA at 60 Hz, cos phi 0.75; once the contactor seals, hold-in drops to 7.5 VA at cos phi 0.3. The ratio tells you the control transformer needs to deliver the inrush peak without dropping below the dropout threshold — a 100 VA control transformer on the same circuit handles this comfortably. Coil resistance measures 2304 Ohm at 20 °C, and the closed-circuit inductance is 85 H. The high inductance explains the low holding VA — the AC impedance at 60 Hz is about 32 kOhm once the armature seats. This coil ships without a built-in suppressor module. If the contactor drives an inductive load or the PLC output is a solid-state relay, you will need an external RC snubber or varistor across the coil to limit back-EMF on dropout.

The LX1D2T6 is marked obsolete by Schneider Electric. No official successor order code is listed for this specific 480 V 60 Hz coil. Availability is through independent surplus and new-old-stock channels. Quantities are confirmed at RFQ time — typical for a legacy TeSys D coil that is no longer in factory production.

MPN
LX1D2T6