Skip to main content
Schneider Electric LX1FH1402

TeSys LX1FH1402 Contactor Coil, 140 V AC, Obsolete

MPN LX1FH1402
Active

TeSys LX1FH1402, contactor coil, 140 V AC 40-400 Hz, for LX1F contactors.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FH1402 specifications
ParameterValue
Control circuit typeAC 40...400 Hz
Main product or component typeContactor coil
Coil voltage140 V AC 40...400 Hz
Temp operating max55 °C
Temp operating min-5 °C
Operating time100...170 ms opening 40...65 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The TeSys LX1FH1402 is a replacement contactor coil for LX1F contactors, rated at 140 V AC control voltage at 40 to 400 Hz. It opens in 100 to 170 ms and closes in 40 to 65 ms — timing that matters when coordinating interlocking or safety circuits in a panel.

Sourcing reality — obsolete, no direct replacement

Schneider Electric has marked the LX1FH1402 as obsolete. If you are holding a legacy LX1F contactor with a failed coil, this is the exact part you need; there is no pin-compatible drop-in from the current TeSys range.

The coil dissipates 8 W at 40 to 400 Hz — a figure to factor into enclosure thermal calculations, especially in a densely packed panel. Maximum operating rate is 2400 cycles per hour at 55 °C, which governs how fast the contactor can be cycled without overheating the coil. Drop-out voltage is 0.35 to 0.55 Uc, operational range 0.85 to 1.1 Uc at 55 °C, so the coil holds in reliably down to about 119 V AC and drops out cleanly below 77 V AC.

MPN
LX1FH1402