Skip to main content
Schneider Electric SH31401P0AA4000

Schneider Electric SH31401P0AA4000 Servo Motor, 140mm

MPN SH31401P0AA4000
Active

Schneider Electric SH3 servo motor, 140 mm flange, 11.1 N.m continuous stall torque, IP65/IP54, smooth shaft, rotatable connector, single-turn absolute Hiperface DSL encoder, without brake.

$1,973.54 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

SH31401P0AA4000 specifications
ParameterValue
Shaft end typeSmooth shaft
Main product or component typeServo motor
Length217.5 mm
Shaft diameter24 mm
Centring collar diameter130 mm

Product details

Motor ratings that depend on the line voltage

The SH31401P0AA4000 delivers different torque and power depending on the supply voltage it sees. At 230 V single-phase, nominal speed is 1500 rpm with 10.6 N.m nominal torque and 1670 W output. Feed it 400 V three-phase and those numbers shift to 3000 rpm, 9.2 N.m, and 2890 W. At 480 V three-phase, it runs 3600 rpm, 8.4 N.m, and 2890 W. Continuous stall torque sits at 11.1 N.m across the 115...480 V three-phase range, with a peak stall torque of 27 N.m for short-term overloads. The continuous stall current is 7.8 A; maximum current Irms is 20.8 A — use the higher figure for drive sizing during acceleration and deceleration phases.

Feedback, wiring, and environmental sealing

The encoder is an absolute single-turn Hiperface DSL type with 262144 points per turn resolution — no homing sequence needed on power-up for single-turn applications. The back EMF constant is 100 V/krpm at 20°C, and the torque constant is 1.43 N.m/A at 120°C copper temperature. Electrical connection is via a Quicklock rotatable right-angle connector — the connector body rotates for cable exit orientation without breaking the seal. The motor body is IP65 per IEC 60034-5; the shaft bushing without a shaft seal ring drops to IP54. If the application sees directed spray at the shaft exit, plan for an external shaft seal. Cooling is natural convection — no external fan. The continuous power rating of 2900 W assumes free airflow around the motor body; derate if mounted in a confined space or near heat sources. Stator resistance is 1.41 Ohm and inductance is 16.3 mH, which the drive's current loop tuning will need.

Mechanical fit — flange, shaft, and mounting pattern

The motor flange size is 140 mm (IEC standard), with a centring collar diameter of 130 mm and depth of 3.5 mm. Four mounting holes on a 165 mm bolt circle, each 11 mm diameter — M10 or 3/8-inch bolts fit. Overall length is 217.5 mm. The shaft is 24 mm diameter, 50 mm long, with a smooth shaft end — no keyway. This means the load coupling must use a clamping or friction-based method (taper-lock bushing, shrink disc, or set-screw hub with a split bore). No brake is fitted, so vertical-axis loads require an external holding brake or a motor variant with the brake option.

Sourcing and lifecycle — current production, quoted to order

No stock-holding claim; each RFQ is handled individually.

MPN
SH31401P0AA4000