Skip to main content
Schneider Electric XCKL102H7

Square D XCKL102H7 Limit Switch, XCKL Series, IP66, 3A@240VA

MPN XCKL102H7

Square D XCKL Series, XCKL102H7, Limit Switch, IP66, Roller Plunger, 1NO/1NC, 3 A @ 240 VAC, 0.27 A @ 250 VDC.

$39.37 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

XCKL102H7 specifications
ParameterValue
SeriesXCKL
ActuationRoller Plunger
Contact form1NO/1NC
IP ratingIP66
Actuator styleRoller Plunger
Actuator locationTop
Directional movementLinear

Product details

The Square D XCKL102H7 is a limit switch from the XCKL series, built with a Zamak body and a roller plunger actuator on top. The IP66 rating means the housing seals against dust ingress and high-pressure water jets from any direction — so it holds up on washdown lines or outdoor conveyor stations without an extra boot. The 1NO/1NC contact form gives one normally-open and one normally-closed set, which is the standard arrangement for dual-channel safety circuits or position feedback with a separate signal. AC contact rating is 3 A at 240 V, and DC contact rating is 0.27 A at 250 V — the DC figure is the one that governs inductive loads like DC solenoids or small relays, because DC arcs are harder to extinguish than AC.

Temperature and environmental limits

Operating temperature range is -13 °F to 158 °F (-25 °C to 70 °C). The switch is rated shock and vibration resistant, which is typical for a limit switch on a reciprocating machine or a vehicle-mounted application. No boot is included on the actuator — if the roller plunger sees direct washdown, an external boot kit is worth adding to keep debris out of the plunger shaft.

MPN
XCKL102H7