Skip to main content
ABB 1SAM250000R1009

ABB 1SAM250000R1009 motor protector, 6.3 A, 3-pole

MPN 1SAM250000R1009

ABB MS-series motor protection circuit breaker, 3-pole, 6.3 A rated operating current, Class 10A tripping, 45 mm wide, IP 20 / IP 10, order code 1SAM250000R1009.

$24.13 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

1SAM250000R1009 specifications
ParameterValue
Poles3
IP ratingIP20 / IP10
Depth85.6 mm
Width45 mm
Height90 mm

Product details

It is a 3-pole device, 45 mm wide, 90 mm tall, and 85.6 mm deep, so the DIN-rail footprint matches the standard 45 mm modular slice used across this ABB accessory family and lines up cleanly under a same-frame contactor. In a typical motor-starter assembly, this part takes the place of a fuse + overload combination: it carries the motor load itself, interrupts short-circuit fault current, and provides the adjustable thermal trip element that protects the windings — the contactor handles the switching duty downstream.

Ratings that actually decide the fit

Sizing must be done against the motor's full-load current on the nameplate, not against the 6.3 A label. Derating per the thermal characteristic sheet still applies above 70 °C.

Footprint, ingress, and wiring

Width 45 mm keeps it on the standard modular pitch; depth 85.6 mm drives the cabinet depth allowance behind the DIN rail — leave room for the same-frame contactor that clips on the load side of the device. Protection rating is IP 20 on the operator side and IP 10 at the terminations, so the front face is finger-safe during normal operation but the wiring side still needs a closed enclosure or shroud before live work. Flexible conductor range is 0.75 mm² minimum to 2.5 mm² maximum. Ferruled ends are recommended at the upper end of the range to keep the cage clamp seated under vibration.

MPN
1SAM250000R1009