Skip to main content
ABB 1SFA894014R7020

ABB 1SFA894014R7020 PST300 Soft Starter, 300 A, 160 kW

MPN 1SFA894014R7020
Obsolete

ABB PST300 series soft starter, order code 1SFA894014R7020, rated operational current 300 A in-line connection, 160 kW at 400 V, with built-in electronic overload protection.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

1SFA894014R7020 specifications
ParameterValue
Terminal typeMain Circuit: Bars
VoltageMain Circuit 208 ... 600 V AC
Frequency50/60 Hz
ProtocolFiledBusPlug(Standard)
Temp operating max50 °C
Temp operating min0 °C

Product details

The ABB 1SFA894014R7020 is a PST300-series soft starter rated for 300 A in-line connection (Ie), delivering 160 kW at 400 V in that configuration. For inside-delta wiring, the current rating climbs to 515 A and power to 257 kW at 400 V — a common topology for larger motors where the starter sees phase current rather than line current. The built-in electronic overload protection eliminates the need for a separate overload relay, saving panel space and wiring. Control supply is 100...250 V AC, with a separate 24 V DC control circuit for logic-level interfacing. The ramp time is adjustable from 0 to 120 seconds, and initial voltage during start can be set between 30 and 70 % — enough range to handle high-inertia loads like conveyors or centrifuges without mechanical shock.

Integration notes

Main circuit connections use bars with a 10.2 mm hole diameter; control and supply circuits accept rigid 1 x 2.5 mm² wire. Tightening torque for the control circuit is 0.5 N·m. The starter includes signal relays for run, fault, bypass, and overload status, plus yellow and red LEDs for protection and fault indication. Communication is via a standard FieldBusPlug, and analog output is 0...10 V for speed or current feedback to a PLC or drive.

MPN
1SFA894014R7020