Skip to main content
Schneider Electric C104TM040C

Schneider Electric C104TM040C ComPacT NSX TM-D Trip Unit, 40

MPN C104TM040C
Active

Schneider Electric ComPacT NSX100/160, TM-D thermal-magnetic trip unit, rating 40 A at 50 °C, 4 poles 4D, LI protection.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

C104TM040C specifications
ParameterValue
Trip unit typeThermal-magnetic
Main product or component typeTrip unit
Voltage690 V AC 50/60 Hz 750 V DC
IP ratingIP40
Temp storage max85 °C
Temp storage min-50 °C
Temp operating max70 °C
Temp operating min-25 °C
Storage temperature-50...85 °C
Pollution degree3 conforming to IEC 60947-1
ApplicationDistribution
Operating temperature-25...70 °C

Product details

It is rated 40 A at 50 °C, with four protected poles (4D) and the neutral on the left side.

The 40 A rating is at 50 °C ambient — if your enclosure runs hotter, you derate. The long-time pickup (Ir) is adjustable from 0.7 to 1.0 × In, so you can fine-tune the overload threshold to the actual load without swapping the trip unit. The thermal delay (tr) is fixed at 120…400 s at 1.5 × In and 15 s at 6 × Ir — that long band at 1.5× lets a moderate overload ride through without opening, which is what you want for a feeder with a mix of loads. The 4D pole configuration protects all four poles, with neutral protection set to 1 × Ir.

This trip unit snaps into a ComPacT NSX100 or NSX160 breaker frame — the same frame accepts ratings from 15 A to 160 A, so swapping a trip unit changes the breaker's rating without pulling the whole device off the DIN rail or mounting plate. The breaker itself mounts fixed (not plug-in or drawout), which is typical for distribution panels where you do not need quick swap-out. IP40 front-of-panel protection is standard; the rear terminals are live when the breaker is closed, so standard safe-isolation practice applies.

MPN
C104TM040C