Skip to main content
Schneider Electric GBX0400041004F

Schneider Electric GBX0400041004F planetary gearbox, 4:1

MPN GBX0400041004F
Obsolete

Schneider Electric GBX0400041004F planetary gearbox, straight teeth, 40 mm diameter, 4:1 reduction, 15 N.m continuous torque, 94% efficiency, IP54 shaft output, black anodized aluminium housing.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GBX0400041004F specifications
ParameterValue
Main product or component typePlanetary gearbox
IP ratingIP54
Temp operating max90 °C
Temp operating min-25 °C
Housing materialBlack anodized aluminium
Efficiency94%
Max axial force fa n200 N 100 rpm, during 10000 hour at 30 °C 160 N 100 rpm, during 30000 hour at 30 °C
Max radial force fr n200 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C 160 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C

Product details

Planetary gearbox for precision motion — 40 mm frame, 4:1 reduction

The GBX0400041004F is a straight-tooth planetary gearbox in a 40 mm diameter housing, delivering a 4:1 reduction ratio. It is designed for servo or stepper motor output stages where compact axial length and low backlash matter — the maximum torsional backlash is 30 arc.min, which sets the positioning repeatability floor for index tables or pick-and-place axes. Continuous output torque is 15 N.m at 100 rpm and 30 °C; the maximum output torque reaches 24 N.m under the same conditions. The 94 % efficiency means roughly 6 % of the input power is lost as heat inside the housing — in a sealed aluminium body with no external fan, that thermal budget limits duty cycle in continuous high-load runs.

Sourcing reality — obsolete, quoted to order

Schneider Electric has marked the GBX0400041004F as obsolete. The part is available through independent surplus and broker channels; quantities are lot-specific and confirmed at RFQ. For a BOM freeze or a retrofit project, the key fit parameters to cross-check against a replacement candidate are the 40 mm housing diameter, the 4:1 ratio, the 15 N.m continuous torque at 100 rpm, and the 30 arc.min backlash. The shaft output seal is rated IP54 — the housing itself is not sealed, so the gearbox is suited for dry indoor environments or protected enclosures.

Mechanical and environmental limits

Rated service life is 30000 hours at 100 rpm and 30 °C — the limiting wear factors are the radial and axial loads on the output shaft. Maximum radial force Fr is 200 N at 100 rpm for 10000 hours, dropping to 160 N for the full 30000-hour life; axial force Fa follows the same profile. The gearbox is lubricated for life, so no maintenance oil changes are needed over that service window. Noise level is 55 dB at 1 m under no-load — audible but not intrusive in a typical machine hall; under load the gear mesh whine will rise, but the straight-tooth design is inherently noisier than helical at the same ratio.

MPN
GBX0400041004F