Skip to main content
Schneider Electric GC2511B5

Schneider Electric GC2511B5 TeSys GC Modular Contactor, 2P,

MPN GC2511B5
Obsolete

Schneider Electric TeSys GC GC25 modular contactor, 2-pole, 24 V AC 50 Hz control, clip-on DIN rail mount, 1 x 18 mm module width.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GC2511B5 key specifications
ParameterValue
Control typeRemote control
Control circuit typeAC at 50 Hz
Main product or component typeModular contactor
Voltage<= 250 V AC
Coil voltage24 V AC 50 Hz
Insulation voltage ui500 V conforming to IEC 61095 500 V conforming to VDE 0110
Current25 A AC-7 A 8.5 A AC-7B
Utilization categoryAC-7B AC-7 A
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max50 °C
Temp operating min-5 °C

All specifications

GC2511B5 additional specifications
ParameterValue
Storage temperature-40...70 °C
ColorWhite
Depth62.5 mm
Width17.5 mm
Height81 mm
Electrical life cyclesAC-7 A: 100000 cycles AC-7B: 100000 cycles
Mechanical life cycles1000000 cycles
ApplicationMotor control Heating Lighting
Operating time10...25 ms opening 10...30 ms closing
Operating position30°/vertical
Operating temperature-5...50 °C

Product details

Control and power circuit ratings

The GC2511B5: The control circuit is rated 24 V AC at 50 Hz, with an inrush power of 15 VA at 20 °C and a holding dissipation of 1.3 W at 50/60 Hz. The power circuit is rated for utilisation categories AC-7A and AC-7B, covering motor control, heating, and lighting loads. The rated breaking and making capacity is 68 A at 400 V AC for the power circuit, per IEC 61095.

Durability and operating conditions

Electrical durability is 100,000 cycles under both AC-7A and AC-7B; mechanical durability is 1,000,000 cycles. The maximum operating rate is 300 cycles per hour at 50 °C. The contactor withstands shocks of 10 Gn (open) and 15 Gn (closed) for 11 ms, and vibrations of 2 Gn (open) or 3 Gn (closed) from 5 to 300 Hz.

Dimensions are 81 mm high, 17.5 mm wide, and 62.5 mm deep. The white housing carries IP20 protection (VDE 0106) and IP40 when enclosed. Screw-clamp terminals accept up to 6 mm² solid or flexible wire for the power circuit.

Standards compliance

The contactor is designed to IEC 61095 and IEC 60947-5. The rated insulation voltage (Ui) is 500 V per IEC 61095 and VDE 0110. The associated fuse rating for the power circuit is 25 A gL at up to 440 V.

MPN
GC2511B5