Skip to main content
Schneider Electric SH32051P02A1100

SH32051P02A1100 servo motor, 5.5 kW, 400 V three-phase, IP65

MPN SH32051P02A1100
Active

SH32051P02A1100 servo motor, three-phase, 5.5 kW continuous power at 400 V, IP65, absolute multiturn SinCos Hiperface encoder, smooth shaft, natural convection cooling.

$6,500.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

SH32051P02A1100 specifications
ParameterValue
Encoder typeAbsolute multiturn SinCos Hiperface
Shaft end typeSmooth shaft
Main product or component typeServo motor
Length12.6 in (321 mm)
Shaft diameter1.5 in (38 mm)
Max axial force fa n740 N
Max radial force fr n3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm
Centring collar diameter7.09 in (180 mm)

Product details

Motor ratings — what the numbers mean for your load

The SH32051P02A1100: This SH3-series servo motor delivers 5.5 kW continuous power at 400 V three-phase, but the same motor also runs on single-phase 115 V or 230 V with reduced output — 2510 W and 4240 W respectively. At 480 V three-phase it's 5200 W, so the 400 V rating is the ceiling for full power. Nominal torque drops as voltage increases: 31.9 N.m at 115 V single-phase, 27 N.m at 230 V single-phase, 17.5 N.m at 400 V three-phase, and 13.8 N.m at 480 V three-phase. That inverse relationship means if you're running on a 480 V line, you lose about 21% torque compared to the 400 V rating — factor that into your acceleration profile. Peak stall torque is 110 N.m across the three-phase range (115...480 V), and continuous stall torque sits at 36.9 N.m. The 3:1 ratio between peak and continuous tells you the motor can handle short bursts of high torque — useful for indexing or clamping applications, but not for sustained overload.

Encoder feedback — absolute multitrack for position hold

The absolute multiturn SinCos Hiperface encoder gives you position data on power-up without a homing sequence — critical if the machine loses power mid-cycle and needs to resume from the last known position. The SinCos analog track also provides velocity feedback with higher resolution than a pure digital encoder, which helps with low-speed ripple. The back EMF constant is 104 V/krpm at 20°C — that's the voltage the motor generates when spun by the load. If your drive's DC bus can't handle that back-EMF at maximum speed, you'll get overvoltage faults. Check the drive's voltage rating against the motor's speed-torque curve.

Environmental sealing and cooling — where it can live

The shaft bushing seal is the weak point in many motors; here it's rated the same as the housing. Cooling is by natural convection — no fan. That means the motor relies on airflow around the housing, so mounting it in a tight enclosure or near heat sources will derate the continuous torque. Ambient temperature matters more than with a fan-cooled motor.

The sizing reference SH32051P ties this to a known family, so if you need a variant with a different encoder or brake option, the same mechanical frame (flange size 205 mm, shaft 38 mm diameter) is shared across the series.

MPN
SH32051P02A1100