It is a shielded M12 cylindrical sensor with a 2 mm sensing distance, PNP normally-open output, and a 3-wire prewired 2-meter cable terminated with bare ends.
IP67, IP67G, and IP69K cover immersion, oil-resistant sealing, and high-pressure washdown — so this sensor fits directly on machining centers, washdown zones, and food-processing equipment without an extra enclosure. Shielded construction concentrates the sensing field to the front face, allowing flush mounting in steel without derating the 2 mm sensing distance. The 200 mA maximum load current handles direct connection to most PLC inputs or small relays. Supply voltage is 10-30 V DC, and the PNP NO output matches sinking PLC input modules. The cable is oil-resistant and rated for the same temperature range (-40°F to 185°F) as the sensor electronics.
Compliance documentation includes CE, CSA, CSA C22.2, and UL 60947-5-2. The sensor ships with clamping nuts and a toothed washer, so no additional hardware is needed for panel mounting.
Three wires: brown (V+), blue (V-), black (output). Connect black to the PLC input; the NO contact closes when metal enters the 2 mm detection zone. The indicator light confirms target detection during commissioning.