Skip to main content
Schneider Electric A9C20463

Schneider Electric A9C20463 Acti9 iCT Contactor, 63 A AC-7A,

MPN A9C20463
Obsolete

Schneider Electric Acti9 iCT contactor, A9C20463, 3P, 63 A AC-7A, 400 V AC, 127 V AC 60 Hz coil, clip-on 35 mm DIN rail.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C20463 key specifications
ParameterValue
Control typeRemote control
Control signal typeMaintained
Main product or component typeContactor
Voltage400 V AC 60 Hz
Coil voltage127 V AC 60 Hz
Insulation voltage ui500 V AC 50/60 Hz
Current63 A AC-7 A 20 A AC-7B
Frequency100 switching operations/day
Poles3P
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C

All specifications

A9C20463 additional specifications
ParameterValue
Temp operating min-5 °C
Storage temperature-40...70 °C
Pollution degree2
ColorWhite
Depth68.5 mm
Width54 mm
Height85 mm
Electrical life cycles100000 cycles IEC/EN 61095 63 A 60 Hz AC-7 A 30000 cycles IEC/EN 61095 20 A 60 Hz AC-7B 30000 cycles IEC/EN 61095 60 Hz AC-7C 100000 cycles EN/IEC 60947-4-1 60 Hz AC-1 30000 cycles EN/IEC 60947-4-1 60 Hz AC-3 30000 cycles EN/IEC 60947-4-1 60 Hz AC-5 a 30000 cycles EN/IEC 60947-4-1 60 Hz AC-5b
Mechanical life cycles1000000 cycles
ApplicationMotor-heating-lighting
Operating temperature-5...60 °C

Product details

The Schneider Electric A9C20463 is a three-pole contactor from the Acti9 iCT range, rated for motor, heating, and lighting loads on 400 V AC 60 Hz networks. It is a maintained-control device, meaning the coil holds the contacts closed as long as the control signal is present — no latching, no pulse-on/pulse-off. The 63 A AC-7A rating covers resistive and mixed motor loads typical of small commercial and residential panels; the 20 A AC-7B rating applies to inductive lighting or low-inrush motor circuits. The 127 V AC 60 Hz control coil draws 53 VA inrush and settles to 2.1 W holding power at 400 V AC. The contactor is certified to IEC/EN 61095 (electromechanical contactors for household and similar purposes) and carries a pollution degree 2 rating — acceptable for clean, dry control cabinets where conductive deposits are not expected. Electrical durability is specified per duty cycle: 100,000 cycles at 63 A AC-7A, 30,000 cycles at 20 A AC-7B, and 30,000 cycles under AC-3 motor switching. Mechanical durability is rated at 1,000,000 cycles, so the wear-out limit is the electrical load, not the mechanism.

The A9C20463 clips onto a 35 mm symmetrical DIN rail and occupies 54 mm of width — six 9 mm pitches. Depth is 68.5 mm, height 85 mm. The IP20 body is suitable for enclosed panel mounting; the modular enclosure achieves IP40 when installed in a cabinet. Power circuit terminals accept 6 to 25 mm² rigid or 6 to 16 mm² flexible cable via tunnel-type terminals, tightened to 3.5 N·m. Control circuit terminals accept 1.5 to 2.5 mm² (two cables per terminal) at 0.8 N·m. The three normally-open main poles (3 NO) are the only power contacts — no auxiliary contact block is integrated, so if you need feedback to a PLC or status indication, plan for a separate auxiliary block or a separate contactor-mounted module. Operating altitude is 2000 m without derating; above that, dielectric withstand and thermal dissipation both drop. Relative humidity tolerance is 95% at 55 °C, which covers condensation-prone environments provided the enclosure is IP40 or better.

MPN
A9C20463