Skip to main content
Schneider Electric A9C62340

Schneider Electric A9C62340 Reflex iC60N MCB, 40 A 3P Curve

MPN A9C62340
Active

Schneider Electric Acti9 Reflex iC60N, integrated control MCB, A9C62340, 40 A, 3P, curve C, 20 kA breaking capacity.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C62340 specifications
ParameterValue
Trip unit typeThermal-magnetic
Main product or component typeIntegrated control circuit breaker
Coil voltage230 V AC 50/60 Hz 24 V AC 50/60 Hz 48 V AC 50/60 Hz 24 V DC 48 V DC
Insulation voltage ui500 V AC
Breaking capacity20 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2 10 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2
IP ratingIP20
Pollution degree3
ColorWhite
Depth77 mm
Width99 mm
Height84 mm
Electrical life cyclesAC-1: 50000 cycles AC 50 Hz
Mechanical life cycles50000 cycles
ApplicationControl Distribution

Product details

It combines overcurrent protection with remote control switching in a single 3-pole unit, rated at 40 A with a C trip curve. The thermal-magnetic trip unit handles overloads and short circuits, while the control circuit accepts 230 V AC, 24 V AC, 48 V AC, 24 V DC, or 48 V DC for remote on/off commands via maintained or impulse signals.

For motor or lighting circuits with inrush, the C curve means the magnetic trip fires at 5 to 10 times In — so a 40 A C-curve breaker holds through a 200–400 A surge long enough for a motor start or capacitor bank energization, but clears fast on a hard short. Breaking capacity is 20 kA Icu at 230 V AC and 10 kA Icu at 415 V AC, both per EN/IEC 60947-2. Three poles protected (3P) means all three phases are switched and monitored. The control voltage options (230 V AC, 24 V AC, 48 V AC, 24 V DC, 48 V DC) give flexibility for different coil supplies — a 24 V DC control signal is common in PLC-driven panels, while 230 V AC suits direct line-voltage switching.

Fixed mounting mode, 11 module pitches wide (9 mm per pitch = 99 mm width).

MPN
A9C62340