Skip to main content
Schneider Electric XSDH407339

Telemecanique XSDH407339 Inductive Sensor, 40 mm, 12–48 VDC,

MPN XSDH407339

Telemecanique XSD-series block-format inductive proximity sensor, unshielded, 40 mm sensing range, 12–48 VDC, NO-NC PNP output, 200 mA maximum load, screw terminal, order code XSDH407339.

$197.09 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

XSDH407339 specifications
ParameterValue
Shielding typeUnshielded
Voltage12 TO 48 VDC
Frequency50 HZ
Sensing distance40 MM
Temp operating max158 °C
Temp operating min-13 °C
MaterialTHERMOPLASTIC POLYESTER
Dimensions3.1 INCH W X 1.5 INCH D X 3.9 INCH H
Sensing positionFront

Product details

The Telemecanique XSDH407339 (Square D / Schneider brand) is a block-format inductive proximity sensor in the XSD series, built in a thermoplastic polyester housing and intended as a presence-detection switch on industrial machinery. It's the rectangular cousin of the tubular XS metric line — front-facing sensing, screw-terminal termination, 4-wire hookup — and it fits where a barrel sensor physically cannot, like a conveyor frame rail or a pallet-stop pocket.

The four ratings that drive the BOM line: 40 mm rated sensing distance on an unshielded front face, 12 to 48 VDC operating supply, a 50 Hz switching frequency, and a NO-NC PNP output rated for 200 mA maximum load current. The 40 mm figure is generous for a block-format unshielded sensor — useful on bulk-material or pallet-position work where the target approaches on the face rather than passing a side switch. The 50 Hz ceiling means it's not the device for high-speed parts counting; it fits machine-position and end-of-stroke duty. At 12 VDC the PNP output still pulls the rated 200 mA, so the sensor can switch a small solenoid or indicator directly without an interposing relay — confirmed against the maximum load current entry — but for any inductive DC load, a free-wheel diode across the coil is still required downstream.

Environment and approvals

Rated NEMA 3/4X/12/13 and IP67, with an operating temperature range of -13 to 158 DEG F. Approvals on the nameplate are UL, CSA, and CE, which covers the common North American and EU panel-builder requirements; a separate RoHS / REACH dossier is not enumerated in this spec line and would need to be pulled from the Schneider declaration pack if your QA file requires it.

Mechanical and termination

Footprint is 3.1 in W × 1.5 in D × 3.9 in H in block format, with screw-terminal wiring on 4 conductors — sized for the storeroom shelf and field-replaceable with a screwdriver, no soldering iron required.

MPN
XSDH407339