Skip to main content
Schneider Electric A9C21642

Schneider Electric A9C21642 Acti9 iCT Contactor, 2P, 40 A AC

MPN A9C21642
Active

Schneider Electric Acti9 iCT contactor, A9C21642, 2P 2 NO, 40 A AC-7A / 15 A AC-7B, 220-240 V AC 60 Hz coil, clip-on 35 mm DIN rail, IP20/IP40, IEC/EN 61095.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C21642 key specifications
ParameterValue
Control typeRemote and manual control
Control signal typeMaintained
Main product or component typeContactor
Voltage250 V AC 60 Hz
Coil voltage220...240 V AC 60 Hz
Insulation voltage ui500 V AC 50/60 Hz
Current40 A AC-7 A 15 A AC-7B
Frequency100 switching operations/day
Poles2P
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C

All specifications

A9C21642 additional specifications
ParameterValue
Temp operating min-5 °C
Storage temperature-40...70 °C
Pollution degree2
ColorWhite
Depth73.5 mm
Width36 mm
Height85 mm
Mechanical life cycles1000000 cycles
ApplicationMotor-heating-lighting
Operating temperature-5...60 °C

Product details

The headline rating is 40 A in AC-7A duty (inductive loads like motors with low inrush) and 15 A in AC-7B (resistive loads like heating), both at 250 V AC 60 Hz. The coil is rated 220-240 V AC at 60 Hz, drawing 34 VA inrush and 6 W holding. It requires a maintained control signal — no pulse or momentary latching — so the control circuit must hold the coil voltage continuously for the contactor to stay closed. The control circuit terminals accept up to 2.5 mm² flexible cable, torqued to 0.8 N.m; the power circuit terminals take up to 25 mm² rigid, torqued to 3.5 N.m.

The 36 mm width (4 x 9 mm pitches) and 85 mm height fit alongside other Acti9 modular devices. IP20 finger protection on the body; IP40 inside a modular enclosure. Pollution degree 2 (non-conductive dust, occasional condensation) covers most clean indoor panel environments.

Durability and switching duty

Electrical durability varies by duty: 100,000 cycles at 40 A AC-7A, 30,000 cycles at 15 A AC-7B, and 30,000 cycles for AC-3 (cage motor starting) and AC-5a/AC-5b (discharge lamp switching). Mechanical durability is 1,000,000 cycles. The rated switching frequency is 100 operations per day — this is not a high-speed cycling contactor; it's sized for daily on/off control of a fixed load like a fan or heater bank.

MPN
A9C21642