Skip to main content
Schneider Electric ATV1200A10804242

Schneider Electric ATV1200A10804242 AC Drive, 903 kW

MPN ATV1200A10804242
Obsolete

Schneider Electric Altivar 1200 AC drive, ATV1200A10804242, 903 kW motor power, 1080 kVA apparent power, 2970-3630 V supply, 24-pulse diode rectifier, floor-standing enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A10804242 specifications
ParameterValue
Input type24 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current150 A
IP ratingIP31 / IP42 / IP41
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1600 mm (high efficiency) 1400 mm (high efficiency)
Width3660 mm (high efficiency) 3960 mm (high efficiency)
Height2670 mm standard efficiency 2820 mm high efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

What this 903 kW drive delivers in a medium-voltage line

The ATV1200A10804242 is a medium-voltage AC drive from the Altivar 1200 range, rated for 903 kW motor power and 1080 kVA apparent power, with a supply voltage window of 2970 to 3630 V. It uses a 24-pulse diode rectifier bridge on the input, which significantly reduces line-side harmonics compared to a 6- or 12-pulse design — relevant for installations where IEEE 519 compliance is a concern. The drive is assembled in a floor-standing enclosure with separate air flows for power and control sections, keeping heat away from sensitive electronics.

Overload capability and duty cycle

Standard overload rating: 1.2 × In for 60 seconds and 1.5 × In for 3 seconds. High overload rating: 1.5 × In for 60 seconds and 1.85 × In for 3 seconds. This means the drive can handle short-duration peak loads — a 1.85× overload for 3 seconds is useful for starting high-inertia loads like large fans or centrifuges without oversizing the drive.

Physical footprint and cooling demands

Dimensions vary by efficiency variant: standard efficiency is 2670 mm high, 3660 mm wide, and 1600 mm deep; high efficiency adds height to 2820 mm and width to 3960 mm, with depth at 1400 mm. Cooling air volume is substantial — 29,900 m³/h for standard efficiency, 33,200 m³/h for high efficiency — so the installation room must have adequate ventilation or ducting to handle the heat rejection. Forced convection cooling is standard; the internal fan supply is 380 V AC, with an optional external supply for the fan.

Standards, isolation, and environmental limits

The drive carries CE marking and complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1. Electrical isolation between power and control is standard. Pollution degree 2 per EN/IEC 61800-5-1, overvoltage category II. Dielectric strength tested at 20 kV AC between earth and power terminals. Operating altitude up to 1000 m without derating; above that, derate current by 0.6% per additional 100 m. Vibration resistance is 4.9 m/s² from 10 to 50 Hz.

MPN
ATV1200A10804242