Skip to main content
Schneider Electric GC1610E5

GC1610E5 TeSys GC Modular Contactor, 1P, 48 VAC 50 Hz

MPN GC1610E5
Obsolete

Schneider Electric TeSys GC series, modular contactor, GC1610E5, 1-pole, 48 V AC 50 Hz coil, 16 A rated, 17.5 mm width, DIN-rail clip-on.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GC1610E5 key specifications
ParameterValue
Control typeRemote control
Control circuit typeAC at 50 Hz
Main product or component typeModular contactor
Voltage<= 250 V AC
Coil voltage48 V AC 50 Hz
Insulation voltage ui500 V conforming to IEC 61095 500 V conforming to VDE 0110
Current16 A AC-7 A 5 A AC-7B
Breaking capacity40 A at 400 V for power circuit conforming to IEC 61095
Utilization categoryAC-7 A AC-7B
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max50 °C

All specifications

GC1610E5 additional specifications
ParameterValue
Temp operating min-5 °C
Storage temperature-40...70 °C
ColorWhite
Depth62.5 mm
Width17.5 mm
Height81 mm
Electrical life cyclesAC-7 A: 100000 cycles AC-7B: 100000 cycles
Mechanical life cycles1000000 cycles
ApplicationLighting Motor control Heating
Operating time10...25 ms opening 10...30 ms closing
Operating position30°/vertical
Operating temperature-5...50 °C

Product details

The GC1610E5 is a 1-pole modular contactor from the TeSys GC series, rated for 16 A in AC-7A and AC-7B utilisation categories — that covers lighting, motor control, and heating loads. The 48 V AC 50 Hz coil pulls in at 0.85 to 1.1 Uc and drops out between 0.2 and 0.75 Uc, so it stays latched through typical line sags but releases cleanly on undervoltage. Breaking capacity is 40 A at 400 V per IEC 61095, meaning it can interrupt locked-rotor or inrush currents on small motors without welding the contacts.

The 16 A rating is the thermal current (Ith) at 50 Hz in the power circuit, with an average impedance of 2.5 mOhm per pole — heat dissipation runs 1.3 W at 50/60 Hz, or 0.65 W per pole. That keeps the panel temperature rise manageable in a crowded enclosure. The associated fuse recommendation is 16 A gL at ≤ 440 V, so upstream protection is straightforward. Mechanical durability is 1,000,000 cycles; electrical durability is 100,000 cycles in both AC-7A and AC-7B duty. Maximum operating rate is 300 cycles per hour at 50 °C — fine for lighting contactor or small motor switching, not for high-speed cycling like a welding controller. Screw-clamp terminals on both control and power circuits accept up to 6 mm² flexible or solid wire on the power side, and 2.5 mm² on the control side. Tightening torque is 0.8 N.m for both — a common value that matches standard electrician screwdrivers.

Compliant with IEC 61095 (household and similar electromechanical contactors) and IEC 60947-5 (control circuit devices). IP20 protection on the body (IP40 in an enclosure per VDE 0106) means it is safe for finger-probe access inside a panel but needs an enclosure for dust or splash protection.

MPN
GC1610E5