Skip to main content
Schneider Electric ILM0702P01A0000

ILM0702P01A0000 Schneider ILM Servo Motor, 720 W, 6000 rpm

MPN ILM0702P01A0000
Active

Schneider Electric PacDrive 3 ILM servo motor integrated drive, 720 W nominal output, 6000 rpm nominal speed, 1.15 N·m nominal torque, Hiperface SinCos single-turn feedback, IP54, international standard flange.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM0702P01A0000 specifications
ParameterValue
Shaft end typeUntapped
Main product or component typeServo motor integrated drive
IP ratingIP54
Length8.9 in (226 mm)
Shaft diameter0.4 in (11 mm)
Max axial force fa n0.2 x Fr
Centring collar diameter2.4 in (60 mm)

Product details

PacDrive 3 ILM, 720 W integrated servo motor

The ILM0702P01A0000 is a Schneider Electric PacDrive 3 series integrated servo motor — the drive electronics sit on the back of the 70 mm flange, so the unit replaces a separate motor-and-drive pair on the machine and shortens the panel-to-machine cable run. Continuous rating is 720 W output at 6000 rpm nominal, with 1.15 N·m nominal torque and 1.5 A line-rated current — the spec pair that decides the matching drive sizing and the heat-soak budget in a sealed cabinet.

Torque envelope — nominal, continuous stall, peak

Three torque points define the working window: 1.15 N·m nominal, 1.7 N·m continuous stall, and 7.6 N·m peak stall — the 6.6:1 peak-to-nominal ratio is the acceleration headroom available during index moves before the I²t trip engages, and it is the figure that matters more than the nominal for short-stroke packaging and pick-and-place sizing. Continuous stall draws 2.5 A and the maximum Irms is 11.8 A — that pair sets the LXM/PacDrive controller sizing and the cable cross-section that survives the peak without nuisance I²T trips on a cold-start index.

Feedback, cooling, and enclosure

Feedback is an absolute single-turn SinCos Hiperface encoder at 128 periods per turn, so absolute position survives a power cycle — the controller comes up knowing axis position without a homing routine on every restart. Cooling is natural convection and the housing is IP54, so the motor is specified for cabinet interiors and clean industrial environments rather than washdown; the holding-brake option is not fitted on this build.

Shaft, flange, and radial load

Output shaft is 11 mm diameter × 23 mm long with an untapped end and no second shaft extension, mounted on a 70 mm international-standard flange with a 60 mm centring collar and four 5.5 mm mounting holes — that is the mating footprint a coupling or gearbox has to match. Maximum radial load Fr scales from 710 N at 1000 rpm down to 390 N at 6000 rpm, and maximum axial Fa is capped at 0.2× Fr — the belt tension or pinion load must be sized against the speed-dependent Fr curve, not a single number on the nameplate.

MPN
ILM0702P01A0000