Skip to main content
Schneider Electric MH30703P01A2200

Schneider Electric MH30703P01A2200 Servo Motor, 1540 W

MPN MH30703P01A2200
Active

Schneider Electric MH30703P01A2200 servo motor, three-phase, 1540 W continuous power, 5000 rpm nominal speed, 3.18 N.m nominal torque at 115 V, single-turn SinCos Hiperface encoder, IP65, smooth shaft, flange size 70 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MH30703P01A2200 specifications
ParameterValue
Encoder typeSingle turn SinCos Hiperface
Shaft end typeSmooth shaft
Main product or component typeServo motor
IP ratingIP65
Length7.3 in (186 mm)
Shaft diameter0.6 in (14 mm)
Centring collar diameter2.4 in (60 mm)

Product details

What this 1540 W servo motor fits

The MH30703P01A2200 is a three-phase servo motor from Schneider Electric's MH3 series, delivering 1540 W continuous power at 5000 rpm nominal speed. It's sized for applications that need sustained torque at high speeds — think spindle drives, packaging machine axes, or any motion profile where the load cycle stays within the continuous stall torque of 3.4 N.m (30.09 lbf.in) across the 115...480 V range. The nominal torque varies with the drive voltage and phase configuration: 3.18 N.m at 115 V three-phase, dropping to 2.26 N.m at 480 V three-phase when paired with an LXM52 or LXM62 drive. That means the same motor body can serve different line voltages — useful if you're standardising on one frame size across multiple machine variants.

Encoder, shaft, and environmental fit

A single-turn SinCos Hiperface encoder provides absolute position feedback within one revolution — no homing sequence needed at power-up if the application only needs position within a single turn. The smooth shaft (14 mm diameter, 30 mm length) means the load coupling uses a clamp-type or shrink-fit connection rather than a keyway; budget for the correct shaft collar or coupling bore. The rotatable right-angled connectors let you route the power and feedback cables in tight enclosures without bending the cable below its minimum radius.

For a retrofit into an existing machine, check that the flange size (70 mm, international standard) and centring collar (60 mm diameter, 2.5 mm depth) match your mounting bracket. The 5.5 mm mounting holes are standard M5 clearance; no adapter plate needed if the original motor used the same bolt pattern.

MPN
MH30703P01A2200