Skip to main content
Schneider Electric TM200C32R

Schneider TM200C32R M200 PLC, 32 IO, Fast Inputs, RS485

MPN TM200C32R
Active

Schneider Electric Modicon M200 PLC, 32 I/O, relay output, 8 fast/high-speed inputs, RS232/RS485, USB programming, 100–240 VAC supply.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

TM200C32R specifications
ParameterValue
Main product or component typeLogic controller
Frequency0.1 Hz with maximum load
IP ratingIP20
Response time5 µs turn-off, I0, I1, I6, I7 terminal(s) for high speed input 5 µs turn-on, I0, I1, I6, I7 terminal(s) for high speed input 100 µs turn-off, I2...I5 terminal(s) for fast input 35 µs turn-on, I2...I5 terminal(s) for fast input 100 µs turn-off, I8...I13 terminal(s) for regular input 35 µs turn-on, I8...I13 terminal(s) for regular input 10 ms turn-off, Q0...Q15 terminal(s) for relay output 10 ms turn-on, Q0...Q15 terminal(s) for relay output 125 µs turn-off, I14...I19 terminal(s) for regular input 55 µs turn-on, I14...I19 terminal(s) for regular input
Temp storage max70 °C
Temp storage min-25 °C
Temp operating max55 °C
Temp operating min0 °C
Storage temperature-25...70 °C
Pollution degree<= 2
Depth70 mm
Width175 mm
Height90 mm
Electrical life cycles100000 cycles AC-12, 240 V, 480 VA, resistive 100000 cycles DC-12, 24 V, 48 W, resistive
Mechanical life cycles20000000 cycles for relay output
Backup time3 years at 25 °C (by interruption of power supply)
Input impedance3.3 kOhm for discrete input
Operating temperature0...55 °C (horizontal installation)

Product details

The TM200C32R – a no-nonsense 32-point M200 controller

32 discrete I/O with 4 high-speed (100 kHz) and 4 fast inputs – handles quadrature encoders, pulse trains, or simple counting without an extra module. Normally open relay outputs rated for 250 VAC or 30 VDC. Programmed via the USB Mini-B port – no special cable needed. Also carries RS232 and RS485 for HMIs, drives, or Modbus daisy chains.

What the key timings mean for your machine cycle

High-speed inputs (I0, I1, I6, I7) respond in 5 µs on/off – fine for 100 kHz single-phase or quadrature counting at 32-bit resolution. Fast inputs (I2–I5) switch in 35 µs (on) and 100 µs (off) – tight enough for registration marks or short-pulse sensors. Relay outputs cycle in 10 ms – adequate for machine sequencing; if you need faster, you'll want a solid-state expansion module. Built-in PID regulator handles up to 14 loops simultaneously – saves an external process controller for temperature or pressure.

Power, environment, and battery – keep it simple

Runs on 85–264 VAC, 50/60 Hz – global mains, no DC supply needed. Sucks about 50 A inrush on power-up, so size your breaker accordingly. Sensors get 24 VDC at 300 mA straight from the controller – no separate PSU for a handful of prox sensors or photocyes. Real-time clock backed by a BR2032 lithium battery, rated 5-year life. At 25°C, program and data hold for 3 years if mains drops. Clock drift ≤ 90 seconds per month – typical for this class, adequate for most stamp-and-log applications. Pollution degree 2 environment, vibration tolerance up to 2 gn above 8.7 Hz on panel.

Standards and compliance – no paperwork surprises

CE marked, tested to IEC 61131-2 (PLC standard) and IEC 61010-2-201 (control equipment safety). Insulation between output groups and internal logic rated at 1780 VAC. CE marked; UL and CCC not on record. Verify with project certificate if required.

MPN
TM200C32R