Skip to main content
Schneider Electric VW3SKMD100I006A

VW3SKMD100I006A dv/dt Filter, 6 A, 690 V, Obsolete

MPN VW3SKMD100I006A
Obsolete

Schneider Electric VW3SKMD100I006A dv/dt output filter, 6 A, 690 V AC, 100 Hz max drive frequency, IP00, obsolete.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

VW3SKMD100I006A specifications
ParameterValue
Main product or component typeDv/dt filter
IP ratingIP00
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-10 °C
Storage temperature-40...70 °C
Depth119 mm
Width158 mm
Height155 mm

Product details

The Schneider Electric VW3SKMD100I006A is a dv/dt output filter for variable speed drives, rated at 6 A continuous current and 690 V AC. It limits the voltage rise rate (dv/dt) to 6000 V/µs max at 690 V, protecting motor winding insulation from reflected wave spikes on long cable runs.

What the dv/dt rating means for fit

The 6000 V/µs dv/dt limit at 690 V is the key spec — it tells you the filter's rise-time clamping performance at the drive's output terminals. For a 690 V drive feeding a motor through 500 m of unshielded cable (or 300 m shielded at 2.5 kHz switching frequency), this filter keeps voltage overshoot within the motor's insulation class. Below that cable length or at lower switching frequencies, the margin is generous; push past those limits and you risk winding stress.

This part is marked obsolete by the manufacturer. If you're holding a line-down situation, the dv/dt performance and cable-length limits above are the fit criteria to verify before committing the replacement.

IP00 enclosure — no ingress protection, so it's strictly for inside a panel or cabinet, away from washdown or dust. Dimensions are 158 mm wide, 155 mm high, 119 mm deep. Electrical connection via copper bar M10. Operating ambient temperature range is -10 to 50 °C without derating; above that, derate 1.5 % per °C up to 60 °C. Storage temperature spans -40 to 70 °C.

Derating and altitude

No current derating needed from 0 to 1000 m altitude. Above that, derate 1 % per 100 m up to 4000 m. The maximum drive output frequency is 100 Hz, so this filter is sized for standard induction motor applications, not high-speed spindles.

MPN
VW3SKMD100I006A