Skip to main content
Log in
Schneider Electric 140DAI34000

Schneider Modicon 140DAI34000 Quantum 16-Point 24VAC Input M

MPN140DAI34000
End of Life

Modicon Quantum 140DAI34000, 16-point 24V AC discrete input module, standard format, 1 input word addressing, bus current 180 mA.

$608.84 – $1,448.00Ref. price · indicative, final on quote
Schneider Electric 140DAI34000 datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

140DAI34000 key specifications
ParameterValue
Range of productModicon Quantum automation platform
Product or component typeVAC discrete input modules
Discrete input voltage24 V AC
Voltage state 0 guaranteed0...6 V 57...63 Hz 0...5 V 47...53 Hz
Voltage state 1 guaranteed16...30 V AC 57...63 Hz 18...30 V AC 47...53 Hz
Input current12 mA 57...63 Hz 10.7 mA 47...53 Hz
Bus current requirement180 mA
Maximum leakage current1.9 mA
Maximum power dissipation in5.5 W
Network frequency limits47...63 Hz
Response time4.9...0.75 ms x line cycle Off-On 7.3...12.3 ms On-Off
Relative humidity95 % without condensation

All specifications

140DAI34000 additional specifications
ParameterValue
Operating altitude<= 16404.2 ft (5000 m)
StandardsCSA C22.2 No 142 UL 508
MarkingCE
Category18155-QUANTUM I/O & POWER SUPPLIES
Module formatStandard
Software nameConcept ProWORX 32 Unity Pro
Input impedance2600 Ohm capacitive 57...63 Hz 3100 Ohm capacitive 47...53 Hz
Local signalling1 LED (green) for bus communication is present (Active) 1 LED (red) for external fault detected (F) 16 LEDs (green) for input status
Group of channels16
Discrete input number16
Absolute maximum input30 V continuous 32 V 10 s 50 V 1 cycle
Addressing requirement1 input word
Isolation between channels1780 Vrms for 1 minute
Isolation between channels and bus1780 Vrms for 1 minute
Ambient air temperature for storage-40...185 °F (-40...85 °C)
Resistance to electromagnetic fields9.1 V/m (10 V/m) 80...2000 MHz IEC 801-3
Ambient air temperature for operation32...140 °F (0...60 °C)
Resistance to electrostatic discharge4 kV contact IEC 801-2 8 kV on air IEC 801-2

Product details

16-point 24V AC input slice

The Schneider Modicon 140DAI34000 is a 16-point 24V AC discrete input module for the Quantum automation platform, addressing as one input word and drawing 180 mA from the backplane bus. It accepts line frequencies from 47 to 63 Hz; at nominal 60 Hz each channel draws 12 mA, or 10.7 mA at 50 Hz. The input impedance of 2600 Ω capacitive at 60 Hz (3100 Ω at 50 Hz) presents a light load to the source transformer, suitable for long AC runs in cold storage or freezer areas where signal transformers may be undersized.

Noise margins and isolation

Channel-to-bus and channel-to-channel isolation rated 1780 Vrms for one minute. Maximum leakage current is 1.9 mA.

Response timing and diagnostics

Response time is line-cycle-dependent: Off-On ranges from 4.9 ms (60 Hz) to 0.75 ms (50 Hz); On-Off from 7.3 ms to 12.3 ms. The module adapts timing to the detected line frequency, so a 50/60 Hz system swap does not require reconfiguration. Sixteen green LEDs per input and a green bus-active LED give immediate visual feedback for on-site troubleshooting. A red LED signals an external fault.

Sourcing posture

Available to order against an RFQ. Since it is an active Quantum family module, lead times are standard factory build cycles.

Frequently asked questions

What compliance documentation does the 140DAI34000 carry?

The module is CE marked and certified to CSA C22.2 No 142 and UL 508, covering safety standards for industrial control equipment.

What is the input voltage and channel count?

It is a 16-point input module accepting 24 V AC at 47-63 Hz, with an absolute maximum of 30 V continuous and 32 V for 10 seconds.

What is the isolation rating between channels?

Channel-to-channel and channel-to-bus isolation is 1780 Vrms for one minute, suitable for separating control and field circuits.

MPN
140DAI34000