Skip to main content
Schneider Electric 140DRA84000C

Schneider 140DRA84000C Relay Output Module, 16 Outputs, EOL

MPN140DRA84000C
Obsolete

Schneider Modicon Quantum relay discrete output module, 16 outputs, Form A, 20-250 V AC, conformal coated.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

140DRA84000C key specifications
ParameterValue
Range of productModicon Quantum automation platform
Product or component typeRelay discrete output module
Contacts type and composition1 NO
Discrete output voltage20...250 V AC 30...150 V DC 5...30 V DC
Surge current10 A 10 ms capacitive
Maximum load current1 A 250/30 V AC/DC 1/8 hp cos phi = 0.4 1 A 250/30 V AC/DC tungsten 2 A 250/30 V AC/DC resistive 140 °F (60 °C) 300 mA 30...50 V DC resistive
Bus current requirement1100 mA
Power dissipation5.5 W + (0.5 x the number of points on)
Contact formForm A
Maximum response time on input open10 ms at state 0 to state 1 20 ms at state 1 to state 0
Relative humidity95 % without condensation
Operating altitude<= 16404.2 ft (5000 m)

All specifications

140DRA84000C additional specifications
ParameterValue
Electrical durability100000 cycles 100 mA 30...150 V DC L/R = 10 ms 100000 cycles 2 A 30 V DC resistive 100000 cycles 30...150 V DC interposing relay 100000 cycles 300 mA 30...150 V DC resistive 200000 cycles 2 A 250 V AC resistive 50000 cycles 500 mA 30...150 V DC resistive
Mechanical durability10000000 cycles
StandardsUL 508 CSA C22.2 No 142
MarkingCE
CategoryUS1PC2118155
Minimum load50 mA 20...250 V AC 50 mA 5...30 V DC
Module formatStandard
Local signalling1 LED (green) for bus communication is present (Active) 1 LED (red) for external fault detected (F) 16 LEDs (green) for input status
Protective treatmentConformal coating Humiseal 1A33
Addressing requirement1 output word
Discrete output number16
Switching capacity in500 VA resistive
Isolation between channels1780 Vrms AC for 1 minute
Output overvoltage protectionInternal by varistor, 275 V
Isolation between channels and bus1780 Vrms AC for 1 minute 2500 V DC for 1 minute
Ambient air temperature for storage-40...185 °F (-40...85 °C)
Resistance to electromagnetic fields9.1 V/m (10 V/m) 80...2000 MHz IEC 801-3
Ambient air temperature for operation32...140 °F (0...60 °C)
Resistance to electrostatic discharge4 kV contact IEC 801-2 8 kV on air IEC 801-2

Product details

Device overview

140DRA84000C is a Modicon Quantum relay output module with 16 Form A (1 NO) contacts, switching loads up to 1 A at 250 V AC or 30 V DC. It draws 1100 mA from the backplane and requires one output word for addressing. Channel-to-channel and channel-to-bus isolation is rated for 1780 Vrms AC for one minute, with DC bus isolation at 2500 V DC — suitable for separating field circuits from the controller backplane.

Installation and field use

Module occupies one Quantum backplane slot. Sixteen green LEDs indicate output state per channel, one green LED for bus active, one red for external fault detection. Conformal coating (Humiseal 1A33) protects against moisture and condensation. Power dissipation is 5.5 W plus 0.5 W per active output — keep the backplane cooling within spec when all 16 channels are on. Minimum load is 50 mA at 20-250 V AC or 5-30 V DC; below that, contact wetting may be unreliable. Maximum response time from state 0 to 1 is 10 ms, 1 to 0 is 20 ms.

Frequently asked questions

What compliance markings does it carry?

CE marking, UL 508, and CSA C22.2 No 142 are listed. The module also includes internal overvoltage protection via a 275 V varistor per channel.

Can it be used in environments with high humidity or condensation?

Yes, the conformal coating (Humiseal 1A33) and a relative humidity rating up to 95% without condensation allow operation in damp conditions within the 0-60 °C ambient range.

MPN
140DRA84000C