Skip to main content
Log in
Schneider Electric 140SDO95300S

Schneider 140SDO95300S Quantum Safety Output, 16-Pt, 19.2-30

MPN140SDO95300S
Obsolete

Schneider Modicon Quantum safety discrete output module 140SDO95300S, 16 outputs 19.2-30 V DC source, CE marked, obsolete.

Schneider Electric 140SDO95300S datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

140SDO95300S key specifications
ParameterValue
Protection typeWith
Range of productModicon Quantum automation platform
Product or component typeSafety dc discrete output module
Maximum voltage drop<0.3 V 0.5 A
Discrete output voltage19.2...30 V DC
Surge current2 A 10 ms
Maximum load current<= 10.04 A each group
Bus current requirement350 mA
Maximum leakage current0.5 mA 30 V
Power dissipation1.9 W + 0.65 I²
Sensor power supply19.2...30 V
Response time<= 20 ms at state 1 to state 0

All specifications

140SDO95300S additional specifications
ParameterValue
MarkingCE
CategoryUS1PC2118151
Load inductanceInductance(H) = 0.5/((current(A))² x (switching frequency(Hz))) 0.5 8 Hz
Fault indicationChannel fault Overload Power supply fault System fault
Local signalling1 LED (green) for bus communication is present (Active) 1 LED (red) for external fault detected (F) 16 LEDs (green) for output status 16 LEDs (red) for system failure, diagnostic of internal channel fault
Group of channels1
Discrete output logicPositive logic (source)
Addressing requirement4 output words 7 input words
Associated fuse rating10 A
Discrete output number16
Absolute maximum output34 V
Isolation between group and bus1500 Vrms for 1 minute
Isolation between channels and bus1500 Vrms for 1 minute

Product details

This is a Schneider Modicon Quantum 140SDO95300S safety DC discrete output module — 16 source outputs, 19.2…30 VDC, each group rated to 10.04 A. It's the safety-rated version of the standard Quantum DO, with a response time ≤20 ms state 1→0 and internal fault detection (overload, power supply, channel). The formula on the label for load inductance (L = 0.5 / (I² × f)) tells you it's designed for inductive switching at low frequency — expect solenoids, contactors, valve coils.

The module draws 350 mA from the Quantum backplane and addresses 4 output words plus 7 input words. Isolation between groups and bus, and between channels and bus, is 1500 Vrms for 1 minute.

Frequently asked questions

What is the CE marking on this module?

The module carries a CE marking as listed in its specifications.

What are the key electrical ratings for the 140SDO95300S?

16 source outputs at 19.2-30 VDC, each group ≤10.04 A, response time ≤20 ms, surge current 2 A for 10 ms. Power dissipation is 1.9 W + 0.65I².

How do I source an obsolete module like this?

Submit an RFQ. We supply pulled units from decommissioned lines, verified for output state, bus communication, and fault LEDs.

MPN
140SDO95300S