Schneider Electric 29470
MPN29470
Obsolete
remote controlled source changeover. Transferpact. ACP plate and BA controller. 220 VAC to 240 VAC 50/60 Hz
$1,290.66 – $1,565.46Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Interface and control unit |
| Product range | MasterPact NT NSX100...250 Compact NS100...630 MasterPact NW Compact NS630b...1600 NSX400...630 |
| Parameter | Value |
|---|---|
| Rated operational current (Ie) | AC-12: 4 A AC 440 V AC-12: 5 A AC 380/415 V AC-12: 8 A AC 110 V AC-12: 8 A AC 220/240 V AC-12: 8 A AC 24 V AC-12: 8 A AC 48 V AC-13: 6 A AC 110 V AC-13: 6 A AC 220/240 V AC-13: 7 A AC 24 V AC-13: 7 A AC 48 V AC-14: 4 A AC 110 V AC-14: 4 A AC 220/240 V AC-14: 5 A AC 24 V AC-14: 5 A AC 48 V AC-15: 3 A AC 220/240 V AC-15: 4 A AC 110 V AC-15: 5 A AC 24 V AC-15: 5 A AC 48 V DC-12: 0.4 A DC 250 V DC-12: 0.6 A DC 110 V DC-12: 2 A DC 48 V DC-12: 8 A DC 24 V DC-13: 2 A AC 24 V |
| Parameter | Value |
|---|---|
| IP degree of protection | IP20 connectors: conforming to EN 60529 IP40 front: conforming to EN 60529 IP30 side: conforming to EN 60529 |
| Parameter | Value |
|---|---|
| Standards | IEC 947-5-1 |
| Parameter | Value |
|---|---|
| Input type | Contacts customer voluntary order to transfer to source R |
| Output signal | Contacts customer: indication of operation in automatic or stop mode |
| Test function | By opening the P25M circuit breaker supplying the controller |
| Operating mode | Automatic operation Forced operation on replacement source Forced operation on normal source Stop (both normal and replacement source off) |
| Selection modes | Circuit breaker on N Circuit breaker on R |
| Local signalling | Off On Fault trip |
| Device short name | ACP + BA |
| Interlocked device | NSX400...630 MasterPact NW NSX100...250 MasterPact NT Compact NS630b...1600 Compact NS100...630 |
| Complementary function | Additional contact: transfer to replacement source only if contact is closed Voluntary transfer to replacement source (e.g. energy management commands) |
| IK degree of protection | Front: IK07 conforming to EN 50102 |
| Supply voltage | 220...240 V AC at 50/60 Hz |
| Accessory (separate part category) | Interlocking accessory |
| [Ith] conventional free air thermal current | 8 A |
MPN
29470