The Delta DVP32XP200R is a 32-point digital input/output extension unit in the DVP Series, powered by an AC supply. It expands the I/O capacity of a DVP-ES2 or DVP-EX2 main processing unit, adding 32 mixed X/Y points to the backplane. Rated for 32 points per unit, this module mounts on the standard DIN rail inside the control panel, connecting via the DVP expansion bus. The AC power supply means it draws line-side power directly, not from the CPU's backplane — factor that into the panel's load calculation.

Delta DVP32XP200R DVP Series 32-Point Digital I/O Extension
Delta DVP Series, Digital Input/Output Extension Unit, DVP32XP200R, 32 points, AC power supply.
Specifications
| Parameter | Value |
|---|---|
| Models | Extension Unit |
| PLC model | DVP32XP200R |
| Model types | Digital Input/Output (X/Y extend) |
| Product series | DVP Series |
| Inputs+Outputs points (unit) | 32 points |
Product details
Frequently asked questions
How do I get current pricing and availability for DVP32XP200R?
Submit an RFQ through this listing. Pricing and stock are confirmed at quote time through independent distribution — no published figures here, but the supply chain is active.
When sourcing DVP32XP200R, what's the closest functional second-source — DVP32XP200T?
The DVP32XP200T is the closest functional peer: same 32-point digital I/O count and DVP Series footprint, but with a DC power supply instead of AC. If your panel runs on 24 VDC, the T variant drops in without rewiring the I/O bus.
Will DVP32XP200R drop into a panel that was specified around DVP32XP200T without rewiring?
Mechanically and bus-wise, yes — same DVP Series footprint and expansion bus. The difference is the power supply: the R version needs an AC feed; the T version runs on DC. If the panel already has AC distribution, no rewiring is needed. If it's all DC, you'll need to run a separate AC line or swap to the T variant.