Rated per EN/IEC 60947-5-1, the contact carries a range of switching capacities depending on the circuit: 6 A at 24 V DC (DC-12), 2 A at 48 V DC, 1.5 A at 60 V DC, 1 A at 130 V DC, and on the AC side 6 A at 240 V AC (AC-12) and 3 A at 415 V AC. That table covers most control-voltage standards you'll find in a panel — 24 VDC, 48 VDC, 120 VAC, 240 VAC. The housing is IP20 finger-safe, pollution degree 3, and tropicalised per the same standard — meaning it holds up in warm, humid environments (95 % RH at 55 °C). Ambient operating range is -35 to 70 °C.
The paperwork is straightforward: the part carries EN/IEC 60947-5-1 compliance, and the standard documentation package (declaration of conformity, CE marking) is available on request.
Clip-on mounting to a standard DIN rail. The 9 mm width means it takes up one module position — useful when you need to add a status feedback contact without re-laying out the whole row. Screw-clamp terminals accept 0.5–2.5 mm² flexible or 1–4 mm² rigid; strip length 10 mm, tightening torque 1 N·m. Bottom comb busbar compatible, so you can share a common supply rail across multiple Acti9 auxiliaries without extra wiring. Dimensions: 73 mm deep, 86 mm tall — standard for the Acti9 family.