The Schneider Electric A9C61225 is a Reflex iC60N Ti24 integrated control circuit breaker from the Acti9 range — a 2-pole thermal-magnetic MCB rated at 25 A with a B curve, designed for distribution and control applications on AC networks at 50/60 Hz. What sets this part apart from a standard MCB is the integrated control: it accepts remote control by pulse, by continuous command, or via a toggle ON/OFF button on the front face, with control circuit voltage options covering 230 V AC, 24 V AC, 48 V AC, 24 V DC, and 48 V DC. The 20 kA Icu breaking capacity at 230 V AC (10 kA at 380–415 V AC) per EN/IEC 60947-2 means it safely interrupts fault currents up to that level without the arc propagating — adequate for most commercial and light industrial distribution boards where the prospective short-circuit current stays under that threshold.
IP20 rated per IEC 60529 — suitable for enclosed panel installation where no water ingress is expected; the front face provides local signalling via a flashing LED for trip/ready/overheat states, a red LED for fault, and a green LED for device ON. Padlockable in the OFF position, with a contact position indicator, giving a visible isolation point for lockout/tagout procedures during maintenance.
Durability and environmental ratings
Rated for 50,000 electrical cycles under AC-1 resistive load and 50,000 mechanical cycles — the electrical endurance is the binding constraint for frequent switching applications like lighting or contactor replacement. Tropicalisation class 2 adds corrosion resistance for humid environments up to 93% relative humidity at 40 °C.
The Reflex iC60N series sits within the broader Acti9 platform, meaning panel builders already standardised on Acti9 can drop this into an existing board without changing the upstream selectivity study or busbar arrangement.