Schneider Electric Acti9 iDPN Vigi, RCBO, 6 A, B curve, 10 kA Icn, 30 mA earth leakage, 1P+N, DIN rail.
| Parameter | Value |
|---|---|
| Earth-leakage sensitivity (IΔn) | 30 mA |
| Earth-leakage protection class / type | Type A |
| Earth-leakage trip time delay | Instantaneous |
| Residual-current tripping technology | Voltage independent |
| Trip unit technology | Thermal-magnetic |
| Local signalling / indication | ON, OFF, fault trip |
| Parameter | Value |
|---|---|
| Rated current (In) | 6 A |
| Rated operational voltage (Ue) | 230...240 V AC 50 Hz |
| Poles description | 1P + N |
| Neutral pole position | Left |
| Network type | AC |
| Network frequency | 50 Hz |
| Rated insulation voltage (Ui) | 400 V AC 50 Hz |
| Rated impulse withstand voltage (Uimp) | 4 kV |
| Overvoltage category | III conforming to IEC 60364 |
| Device location in system | Outgoer |
| Electrical durability | 20000 cycles |
| Mechanical durability (operating cycles) | 20000 cycles |
| Parameter | Value |
|---|---|
| Product name | Acti9 iDPN Vigi |
| Product / component type | Residual current breaker with overcurrent protection (RCBO) |
| Product range / family | Acti9 |
| Device short name | iDPN H Vigi |
| Parameter | Value |
|---|---|
| Mounting support | DIN rail |
| Mounting mode | Clip-on |
| Control type | Toggle |
| Width in 9 mm modules | 4 |
| Terminal connections | Single terminal top or bottom 1...16 mm² rigid Single terminal top or bottom 1...10 mm² flexible Single terminal top or bottom 1...10 mm² flexible with ferrule |
| Wire stripping length | 15 mm for top or bottom connection |
| Terminal tightening torque | 2 N.m top or bottom |
| Width | 36 mm |
| Height | 85 mm |
| Depth | 73 mm |
| Parameter | Value |
|---|---|
| Operating ambient temperature | -25...60 °C |
| Storage ambient temperature | -40...85 °C |
| IP degree of protection | IP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529 |
| Pollution degree | 3 |
| Relative humidity | 95 % at 55 °C |
| Tropicalisation | 2 conforming to IEC 60068-1 |
| Parameter | Value |
|---|---|
| Standards | EN/IEC 61009-2-1 |
It's rated 6 A with a B curve (magnetic trip 3 to 5 times In), breaking 10 kA Icn at 230...240 V AC 50 Hz per EN/IEC 61009-2-1, and integrates 30 mA earth-leakage protection.
Clip-on mounting to DIN rail (EN 50022), neutral on the left. The 9 mm phase-to-neutral pitch matches the Acti9 busbar system — no special adapters needed. Terminals accept 1 to 16 mm² rigid or 1 to 10 mm² flexible; strip 15 mm and torque to 2 Nm. IP20 on the body, IP40 inside a modular enclosure.
10,000 A Icn at 230...240 V AC 50 Hz, conforming to EN/IEC 61009-2-1. That's the rated short-circuit capacity for this RCBO.
It trips when residual current exceeds 30 mA — the standard threshold for personal protection against indirect contact in final circuits. Integrated into the same unit as the overcurrent protection.
Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing confirmed at quote time.