Skip to main content
Log in
Schneider Electric A9DC8616 — Residual Current Breakers (RCCB/RCBO)

Schneider Electric A9DC8616 Acti9 iCV40H RCBO, 16A, 30mA, Ty

MPNA9DC8616
Active

Schneider Electric Acti9 iCV40H RCBO, A9DC8616, 1P+N, 16 A, Type C, 10 kA, 300 mA, DIN rail.

$230.63Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9DC8616 — Residual Current Protection
ParameterValue
Earth-leakage sensitivity (IΔn)300 mA
Earth-leakage protection class / typeType A
Earth-leakage trip time delayInstantaneous
Residual-current tripping technologyVoltage independent
Trip unit technologyThermal-magnetic
Local signalling / indicationON/OFF indication Fault indication
A9DC8616 — Electrical Ratings
ParameterValue
Rated current (In)16 A
Rated operational voltage (Ue)230 V AC 50/60 Hz
Poles description1P + N
Neutral pole positionLeft
Network typeAC
Network frequency50/60 Hz
Rated insulation voltage (Ui)400 V AC 50/60 Hz
Rated impulse withstand voltage (Uimp)4 kV
Overvoltage categoryIII conforming to IEC 60364
Device location in systemOutgoer
Electrical durability20000 cycles
Mechanical durability (operating cycles)20000 cycles
A9DC8616 — Identification
ParameterValue
Product nameActi9 iCV40
Product / component typeResidual current breaker with overcurrent protection (RCBO)
Product range / familyActi9
Device short nameiCV40H
A9DC8616 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Control typeToggle
Width in 9 mm modules4
Terminal connectionsTunnel type terminals top or bottom 1...16 mm² rigid Tunnel type terminals top or bottom 1...10 mm² flexible
Wire stripping length14 mm for top or bottom connection
Terminal tightening torque2 N.m top or bottom
Width36 mm
Height85 mm
Depth73 mm
A9DC8616 — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
Pollution degree3
Relative humidity95 % at 55 °C
Operating altitude2000 m
A9DC8616 — Approvals
ParameterValue
StandardsEN/IEC 61009-2-1

Product details

The Schneider Electric A9DC8616 is an Acti9 iCV40H residual current circuit breaker with overcurrent protection (RCBO), combining a 16 A thermal-magnetic MCB and a 300 mA earth-leakage module in a single 36 mm wide, 1P+N package that clips onto a DIN rail. Rated Icn of 10,000 A at 230 V AC, 50/60 Hz per EN/IEC 61009-2-1, so it clears a bolted fault up to that level without blowing apart — important for panel coordination downstream of a higher-rated upstream breaker.

Listed as current production (active lifecycle stage). This is a standard catalogue item in the Acti9 range, not a phase-out or last-time-buy part.

Installation and wiring notes

Clip-on mounting to DIN rail, 4 x 9 mm module pitches wide (36 mm). IP20 rated (finger-safe), IP40 inside an enclosure.

Durability and environmental limits

Rated for 20,000 electrical and 20,000 mechanical cycles.

Frequently asked questions

What are the key ratings of the A9DC8616?

Rated current 16 A, breaking capacity 10 kA at 230 V AC, earth-leakage sensitivity 300 mA, Type C magnetic trip curve (5–10 x In).

What standards does the A9DC8616 comply with?

It complies with EN/IEC 61009-2-1 for RCBOs, and carries EAC and VDE quality labels. Pollution degree 3 and overvoltage category III per IEC 60364.

MPN
A9DC8616