Skip to main content
Log in
Schneider Electric A9E15536 — 2-Pole MCB (DIN Rail)

A9E15536 Acti9 iRLI Changeover Relay, 10A, 48VAC, Obsolete

MPNA9E15536
Obsolete

Schneider Electric Acti9 iRLI changeover relay, A9E15536, 10 A at 230 V AC, 48 V AC coil, 2-pole, DIN rail mount, obsolete.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9E15536 — Identification
ParameterValue
Product nameActi9 iRLI
Product rangeActi9
Device short nameiRLI
Product / component typeRelay
Device applicationChangeover relay
A9E15536 — Mechanical
ParameterValue
9 mm pitches2
Width18 mm
Height88 mm
Depth70 mm
Mounting support35 mm symmetrical DIN rail
Mounting modeFixed
Terminal connectionsTunnel type terminals 0.5...6 mm²
A9E15536 — Environmental
ParameterValue
Operating temperature range-5...55 °C
Storage temperature range-40...70 °C
A9E15536 — Approvals
ParameterValue
Standards / complianceNF C 45-250 IEC 255

Product details

The A9E15536 is a Schneider Electric Acti9 iRLI changeover relay — a DIN-rail mounted relay with a 48 V AC control coil and a 10 A rated operational current at 230 V AC (cos phi = 1). It switches one C/O plus one NO signal contact, so it handles both a load and a status feedback circuit in one 18 mm wide package.

DIN-rail integration and electrical ratings

Tunnel-type terminals accept 0.5 to 6 mm² wire. Rated insulation voltage is 250 V AC, and electrical durability is rated at 100,000 cycles under AC-21 duty. IP20 finger-safe protection means it is intended for use inside an enclosure, not exposed to washdown.

Designed to NF C 45-250 and IEC 255 standards. Coil inrush and holding power are both 4 VA.

Frequently asked questions

How do I get current pricing and availability for A9E15536?

Submit an RFQ through this listing. Availability and current pricing are confirmed at quote time — we source this obsolete part through independent distribution channels.

What are the key ratings for A9E15536?

It is a changeover relay with a 48 V AC 50/60 Hz control coil, rated 10 A at 230 V AC (cos phi = 1), with a 250 V AC insulation voltage. It has one C/O and one NO signal contact, and mounts on a 35 mm DIN rail in an 18 mm wide housing.

MPN
A9E15536