Schneider Electric Acti9 iERL extension for changeover relay, A9E15540, 10A at 230V AC, 48V AC control voltage, 2-pole, DIN rail mount, IP20.
| Parameter | Value |
|---|---|
| Product name | Acti9 iERL |
| Product range | Acti9 |
| Device short name | iERL |
| Product / component type | Extension for changeover relay |
| Device application | Extension for changeover relay |
| Parameter | Value |
|---|---|
| 9 mm pitches | 2 |
| Width | 18 mm |
| Height | 88 mm |
| Depth | 70 mm |
| Mounting support | 35 mm symmetrical DIN rail |
| Mounting mode | Fixed |
| Terminal connections | Tunnel type terminals 0.5...6 mm² Connection by clip |
| Parameter | Value |
|---|---|
| Operating temperature range | -5...55 °C |
| Storage temperature range | -40...70 °C |
| Parameter | Value |
|---|---|
| Standards / compliance | NF C 45-250 IEC 255 |
IP20 rated, so it belongs inside a cabinet, not on the machine surface. Tunnel-type terminals accept 0.5 to 6 mm² wire; connection is by clip, which speeds up wiring compared to screw terminals.
The 10 A rating at 230 V AC (cos phi = 1) means this extension handles resistive loads up to that current — think lighting banks or heater contactor coils. The 1 C/O + 1 NO signal contact composition gives one changeover and one normally-open auxiliary contact for status feedback or interlocking.
The A9E15540 is sourced to order through independent distribution against an RFQ. Availability and current pricing are confirmed at quote time.
The A9E15540 has a width of 18 mm, which corresponds to 2 x 9 mm pitches on a DIN rail.
The A9E15540 complies with NF C 45-250 and IEC 255 standards.