BOM / RFQ

Schneider Electric A9E15542 — 2-Pole MCB (DIN Rail)

Schneider Electric A9E15542 Acti9 iERL Extension, 10A 2P 12V

MPNA9E15542

Obsolete

Schneider Electric Acti9 iERL extension for changeover relay, A9E15542, 10 A at 230 V AC, 12 V AC control, 2-pole, 70 mm depth, 18 mm width, white.

Add to RFQ

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9E15542 — Identification
Parameter	Value
Product name	Acti9 iERL
Product range	Acti9
Device short name	iERL
Product / component type	Extension for changeover relay
Device application	Extension for changeover relay

A9E15542 — Mechanical
Parameter	Value
9 mm pitches	2
Width	18 mm
Height	88 mm
Depth	70 mm
Mounting support	35 mm symmetrical DIN rail
Mounting mode	Fixed
Terminal connections	Tunnel type terminals 0.5...6 mm² Connection by clip

A9E15542 — Environmental
Parameter	Value
Operating temperature range	-5...55 °C
Storage temperature range	-40...70 °C

A9E15542 — Approvals
Parameter	Value
Standards / compliance	NF C 45-250 IEC 255

Product details

The A9E15542 is an Acti9 iERL extension for changeover relay from Schneider Electric. It is rated 10 A at 230 V AC (cos Phi = 1) with a 12 V AC 50/60 Hz control circuit voltage, and mounts on a 35 mm symmetrical DIN rail. This part is now obsolete per the manufacturer.

Schneider has marked the A9E15542 as obsolete.

Tunnel-type terminals accept 0.5…6 mm² conductors via clip connection. Depth is 70 mm, height 88 mm. IP20 rated — suitable for enclosed panel use only, not washdown or outdoor locations.

Rated operational current is 10 A at 230 V AC (cos Phi = 1) across 1 C/O + 1 NO signal contacts. Electrical durability is 100,000 cycles under AC-21 duty. Control circuit draws 8 VA inrush and holding — no derating curve needed for that steady-state load.