Skip to main content
Log in
Schneider Electric A9F03632 — 1-Pole MCB (DIN Rail)

A9F03632 Acti9 iC60N MCB, 32 A, 1P+N, Curve B, 36 kA

MPNA9F03632
Active

Schneider Electric Acti9 iC60N, A9F03632, miniature circuit breaker, 1P+N, 32 A, curve B, 36 kA breaking capacity, DIN rail mount.

Schneider Electric A9F03632 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9F03632 — Identification
ParameterValue
Product nameActi9 iC60
Product / component typeMiniature circuit-breaker
Product rangeActi9
Device short nameIC60N
Poles description1P + N
Number of protected poles1
Device applicationDistribution
A9F03632 — Electrical & Protection
ParameterValue
Rated current (In)32 A
Tripping curve codeB
Magnetic tripping limit4 x In +/- 20 %
Breaking capacity (Icu / AIR)36 kA Icu at 12...60 V AC 50/60 Hz conforming to EN/IEC 60947-2 20 kA Icu at 100...133 V AC 50/60 Hz conforming to EN/IEC 60947-2 10 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2 6000 A Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60898-1
Network type (AC/DC)DC AC
Network frequency50/60 Hz
Overvoltage categoryIV
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles
A9F03632 — Mounting & Connection
ParameterValue
Terminal connections / wire rangeDouble terminal (top or bottom) 1...35 mm² rigid Double terminal (top or bottom) 1...25 mm² flexible
Mounting supportDIN rail
Width36 mm
Height91 mm
Depth78.5 mm
Tightening torque (by circuit)3.5 N.m top or bottom
A9F03632 — Environmental
ParameterValue
Operating ambient temperature-35...70 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529
A9F03632 — Approvals
ParameterValue
Conformity standardsEN/IEC 60947-2 EN/IEC 60898-1
A9F03632 — Electrical
ParameterValue
[Ui] rated insulation voltage500 V AC 50/60 Hz conforming to EN/IEC 60947-2
[Uimp] rated impulse withstand voltage6 kV conforming to EN/IEC 60947-2

Product details

The A9F03632 is a Schneider Electric Acti9 iC60N miniature circuit breaker — 1P+N, 32 A rated current, curve B, with a 36 kA breaking capacity at 12–60 V AC.

Snaps onto DIN rail (mounting support: DIN rail). Occupies 4 x 9 mm pitches — 36 mm wide, 91 mm tall, 78.5 mm deep. Double terminals top and bottom accept 1–35 mm² rigid or 1–25 mm² flexible; strip length 14 mm, torque to 3.5 N·m. IP20 finger-safe front, but the terminals are live when the breaker is on — standard panel practice. Neutral on the left, toggle control, trip indicator visible through the front. Pollution degree 3, overvoltage category IV, so it's rated for the incoming side of a distribution board, not just downstream sub-circuits.

Frequently asked questions

What is the closest pin-compatible alternative to A9F03632 in this component family?

Within the Acti9 iC60N family, the closest alternative would be a different curve (C or D) or a different current rating — same 1P+N pole configuration, same DIN footprint. No direct pin-compatible substitute exists outside the series; the B-curve 32 A is the standard choice for resistive/lighting loads.

Who supplies A9F03632 and how is it quoted for volume purchases?

The A9F03632 is sourced to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at quote time.

What compliance documentation does this brand provide for A9F03632?

The A9F03632 is certified to EN/IEC 60947-2 and EN/IEC 60898-1, with tropicalisation class 2 per IEC 60068-1. It carries IP20 per IEC 60529 and is suitable for isolation per both standards. RoHS/REACH/UL documentation is typically available from the manufacturer upon request.

MPN
A9F03632