Schneider Electric Acti9 iC60 miniature circuit breaker, A9F04603, 3 A rated current, C-curve, 1P+N poles, 50 kA Icu breaking capacity, DIN rail mount.
| Parameter | Value |
|---|---|
| Product name | Acti9 iC60 |
| Product / component type | Miniature circuit-breaker |
| Product range | Acti9 |
| Device short name | IC60N |
| Poles description | 1P + N |
| Number of protected poles | 1 |
| Device application | Distribution |
| Parameter | Value |
|---|---|
| Rated current (In) | 3 A |
| Tripping curve code | C |
| Magnetic tripping limit | 8 x In +/- 20 % |
| Breaking capacity (Icu / AIR) | 50 kA Icu at 12...60 V AC 50/60 Hz conforming to EN/IEC 60947-2 50 kA Icu at 100...133 V AC 50/60 Hz conforming to EN/IEC 60947-2 50 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2 6000 A Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60898-1 |
| Network type (AC/DC) | DC AC |
| Network frequency | 50/60 Hz |
| Overvoltage category | IV |
| Trip unit technology | Thermal-magnetic |
| Control / actuation type | Toggle |
| Mechanical durability (cycles) | 20000 cycles |
| Parameter | Value |
|---|---|
| Terminal connections / wire range | Double terminal (top or bottom) 1...25 mm² rigid Double terminal (top or bottom) 1...16 mm² flexible |
| Mounting support | DIN rail |
| Width | 36 mm |
| Height | 91 mm |
| Depth | 78.5 mm |
| Tightening torque (by circuit) | 2 N.m top or bottom |
| Parameter | Value |
|---|---|
| Operating ambient temperature | -35...70 °C |
| Storage ambient temperature | -40...85 °C |
| IP degree of protection | IP20 conforming to IEC 60529 |
| Parameter | Value |
|---|---|
| Conformity standards | EN/IEC 60947-2 EN/IEC 60898-1 |
| Parameter | Value |
|---|---|
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz conforming to EN/IEC 60947-2 |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to EN/IEC 60947-2 |
It protects a single pole plus neutral (1P+N) in distribution boards, with a breaking capacity of 50 kA Icu at 240 V AC per IEC 60947-2 and 6000 A Icn at 230 V per IEC 60898-1.
Snaps onto a 36 mm-wide DIN rail — 4 x 9 mm pitches — and occupies a single module width. Double terminals at top and bottom accept 1 to 25 mm² rigid or 1 to 16 mm² flexible cable; strip length is 14 mm and tighten to 2 N.m. IP20 rated, so it lives inside a closed panel, not on the washdown floor.
50 kA Icu at 240 V AC under IEC 60947-2, and 6000 A Icn at 230 V under IEC 60898-1 — sufficient for most distribution board fault levels.
Sourced and quoted to order against an RFQ through independent distribution; availability and current pricing confirmed at quote time.