The Schneider Electric A9F04610 is an Acti9 iC60N miniature circuit breaker (MCB) rated 10 A with a C-curve magnetic trip characteristic (8 x In +/- 20 %), in a 1P+N pole configuration. The 1P+N format protects one phase and switches the neutral without protecting it, common in single-phase final distribution circuits. Breaking capacity is the key fit parameter here: 36 kA Icu at 12-60 V AC, 20 kA at 100-133 V AC, and 10 kA at 220-240 V AC per EN/IEC 60947-2. Under the domestic-standard EN/IEC 60898-1 it carries 6000 A Icn at 230 V AC. The dual rating lets you specify it under either standard depending on the local wiring code. Thermal-magnetic trip unit technology gives two-stage protection: the thermal bimetal handles sustained overloads (e.g., a stalled fan motor drawing 13 A on a 10 A circuit), while the magnetic coil clears short-circuits instantly. The 8 x In magnetic threshold (80 A nominal) is typical for C-curve — high enough to avoid nuisance tripping on capacitor inrush or motor starting, low enough to clear a bolted fault.
Mounts on DIN rail and occupies 4 x 9 mm pitches (36 mm wide), 91 mm tall, 78.5 mm deep — standard single-module width for a 1P+N MCB. The toggle control with trip indicator gives local visual status — white housing with a red flag visible when tripped. Neutral position is left; suitable for isolation per both EN/IEC 60898-1 and EN/IEC 60947-2, meaning you can safely lock it off for downstream work. Earth-leakage protection requires a separate block (Vigi iC60), not integrated.