Skip to main content
Log in
Schneider Electric A9F07150 — 1-Pole MCB (DIN Rail)

Schneider Electric A9F07150 Acti9 iC60H MCB, 50 A, 1P, C Cur

MPNA9F07150
Active

Schneider Electric Acti9 iC60H, A9F07150, miniature circuit-breaker, 1P, 50 A, C curve, 42 kA Icu, DIN rail.

Schneider Electric A9F07150 datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

Identification

A9F07150 — Identification
ParameterValue
Product nameActi9 iC60
Product / component typeMiniature circuit-breaker
Product rangeActi9
Device short nameiC60H
Poles description1P
Number of protected poles1
Device applicationDistribution

Electrical & Protection

A9F07150 — Electrical & Protection
ParameterValue
Rated current (In)50 A
Tripping curve codeC
Magnetic tripping limit8 x In +/- 20 %
Breaking capacity (Icu / AIR)42 kA Icu at 12...60 V AC 50/60 Hz conforming to EN/IEC 60947-2 30 kA Icu at 100...133 V AC 50/60 Hz conforming to EN/IEC 60947-2 15 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2 20 kA Icu at 12...60 V DC conforming to EN/IEC 60947-2 15 kA Icu at 60...72 V DC conforming to EN/IEC 60947-2 10000 A Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60898-1
Network type (AC/DC)AC DC
Network frequency50/60 Hz
Overvoltage categoryIV
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles

Mounting & Connection

A9F07150 — Mounting & Connection
ParameterValue
Terminal connections / wire rangeDouble terminal (top or bottom) 1...35 mm² rigid Double terminal (top or bottom) 1...25 mm² flexible
Mounting supportDIN rail
Width18 mm
Height91 mm
Depth78.5 mm
Tightening torque (by circuit)3.5 N.m top or bottom

Environmental

A9F07150 — Environmental
ParameterValue
Operating ambient temperature-35...70 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529

Approvals

A9F07150 — Approvals
ParameterValue
Conformity standardsEN/IEC 60947-2 EN/IEC 60898-1

Electrical

A9F07150 — Electrical
ParameterValue
[Ui] rated insulation voltage500 V AC 50/60 Hz conforming to EN/IEC 60947-2
[Uimp] rated impulse withstand voltage6 kV conforming to EN/IEC 60947-2

Product details

Schneider Electric A9F07150 is an Acti9 iC60H miniature circuit-breaker, 1-pole, rated 50 A with a C curve. That 18 mm width means it slots into a crowded panel without eating up rail space — one less thing to re-layout.

The iC60H carries a 42 kA Icu at 12…60 V AC and 30 kA Icu at 100…133 V AC, dropping to 15 kA Icu at 220…240 V AC. For a 50 A MCB on a 230/240 V distribution board, 15 kA Icu gives you headroom above typical domestic and light commercial prospective fault levels. The C curve (magnetic trip at 8 x In ±20 %) means it holds through motor inrush and transformer energization but trips fast on a hard short — a good fit for general distribution and mixed loads.

Snaps onto a DIN rail (mounting support: DIN rail).

Frequently asked questions

Where can I buy A9F07150?

Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing confirmed at quote time.

What are the key ratings for A9F07150?

50 A rated current, 1-pole, C curve, 42 kA Icu at 12…60 V AC, 15 kA Icu at 220…240 V AC, thermal-magnetic trip, DIN rail mount, IP20.

What standards does A9F07150 comply with?

It complies with EN/IEC 60947-2 and EN/IEC 60898-1, and carries pollution degree 3 and overvoltage category IV.

MPN
A9F07150