Skip to main content
Log in
Schneider Electric A9F07232 — 2-Pole MCB (DIN Rail)

Schneider Electric A9F07232 Acti9 iC60H MCB, 32 A, C-curve,

MPNA9F07232
Active

Schneider Electric Acti9 iC60H, miniature circuit breaker, 32 A, C-curve, 2 poles, breaking capacity 42 kA Icu at 12-133 V AC, DIN rail mount.

Schneider Electric A9F07232 datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

Identification

A9F07232 — Identification
ParameterValue
Product nameActi9 iC60
Series / familyActi9
Device short nameiC60H
Product / component typeMiniature circuit-breaker
Device applicationDistribution

Electrical

A9F07232 — Electrical
ParameterValue
Rated current [In]32 A
Number of protected poles2
Pole configuration2P
Network type (AC/DC)DC AC
Network frequency50/60 Hz

Protection

A9F07232 — Protection
ParameterValue
Tripping curve codeC
Magnetic tripping limit8 x In +/- 20 %
Breaking capacity (Icu)42 kA Icu at 12...133 V AC 50/60 Hz conforming to EN/IEC 60947-2 30 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2 15 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2 10 kA Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2 15 kA Icu at 10000 A Icn at 400 V AC 50/60 Hz conforming to EN/IEC 60898-1
Rated service breaking capacity [Ics]21 kA 50 % conforming to EN/IEC 60947-2 - 12...133 V AC 50/60 Hz 15 kA 50 % conforming to EN/IEC 60947-2 - 220...240 V AC 50/60 Hz 7.5 kA 50 % conforming to EN/IEC 60947-2 - 380...415 V AC 50/60 Hz 5 kA 50 % conforming to EN/IEC 60947-2 - 440 V AC 50/60 Hz 15 kA 100 % conforming to EN/IEC 60947-2 - <= 125 V DC
Energy limitation class3 conforming to EN/IEC 60898-1
Suitable for isolationYes conforming to EN/IEC 60947-2 Yes conforming to EN/IEC 60898-1
Overvoltage categoryIV
Trip unit technologyThermal-magnetic
Earth-leakage protectionSeparate block
Operating / control typeToggle
Mechanical durability (cycles)20000 cycles

Mechanical

A9F07232 — Mechanical
ParameterValue
9 mm pitches4
Width36 mm
Height91 mm
Depth78.5 mm
Mounting supportDIN rail
Terminal connectionsDouble terminal (top or bottom) 1...35 mm² rigid Double terminal (top or bottom) 1...25 mm² flexible
Terminal tightening torque3.5 N.m top or bottom
Local signalling / indicationTrip indicator
Contact position indicatorYes

Environmental

A9F07232 — Environmental
ParameterValue
Operating temperature range-35...70 °C
Storage temperature range-40...85 °C
Relative humidity95 % at 55 °C

Approvals

A9F07232 — Approvals
ParameterValue
Standards / complianceEN/IEC 60947-2 EN/IEC 60898-1

Product details

The C-curve (magnetic tripping at 8 x In ±20 %) means it handles moderate inrush — typical for lighting, socket circuits, and small motor loads — without nuisance trips. The 42 kA Icu at 12-133 V AC (EN/IEC 60947-2) is the maximum fault current it can safely interrupt; at 380-415 V AC that drops to 15 kA Icu, and under the domestic standard (EN/IEC 60898-1) the Icn is 10 kA at 400 V AC. For a distribution board feeding mixed loads, this breaker covers both the higher SCCR needed at low voltage and the standard 10 kA domestic rating.

Deployment context

Snaps onto DIN rail (mounting support: DIN rail per). Terminals accept 1-35 mm² rigid or 1-25 mm² flexible, double terminal top and bottom — useful for daisy-chaining or paralleling feeds. IP20 finger-safe protection; suitable for dry indoor panels only, not washdown areas.

Frequently asked questions

What is the breaking capacity of A9F07232?

The breaking capacity varies by voltage: 42 kA Icu at 12-133 V AC, 30 kA Icu at 220-240 V AC, 15 kA Icu at 380-415 V AC, and 10 kA Icu at 440 V AC per EN/IEC 60947-2; under EN/IEC 60898-1 the Icn is 10 kA at 400 V AC.

Where can I buy A9F07232?

This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm offer.

MPN
A9F07232