Skip to main content
Schneider Electric A9F07463 — Miniature Circuit Breakers (MCB)

Schneider Electric A9F07463 Acti9 iC60H MCB, 63 A, 4P, C-Cur

MPNA9F07463
Active

Schneider Electric Acti9 iC60H, A9F07463, miniature circuit breaker, 63 A, 4P, C-curve, 42 kA breaking capacity, DIN rail mount.

StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

Identification

A9F07463 — Identification
ParameterValue
Product nameActi9 iC60
Product rangeActi9
Product/component typeMiniature circuit-breaker
Device applicationDistribution

Ratings

A9F07463 — Ratings
ParameterValue
Rated current (In)63 A
Poles configuration4P
Number of protected poles4
Breaking capacity42 kA Icu at 12...133 V AC 50/60 Hz conforming to EN/IEC 60947-2 30 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2 15 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2 10 kA Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2 15 kA Icu at 10000 A Icn at 400 V AC 50/60 Hz conforming to EN/IEC 60898-1
Rated service breaking capacity (Ics)21 kA 50 % conforming to EN/IEC 60947-2 - 12...133 V AC 50/60 Hz 15 kA 50 % conforming to EN/IEC 60947-2 - 220...240 V AC 50/60 Hz 7.5 kA 50 % conforming to EN/IEC 60947-2 - 380...415 V AC 50/60 Hz 5 kA 50 % conforming to EN/IEC 60947-2 - 440 V AC 50/60 Hz 15 kA 100 % conforming to EN/IEC 60947-2 - <= 250 V DC
Rated insulation voltage (Ui)500 V AC 50/60 Hz conforming to EN/IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV conforming to EN/IEC 60947-2
Network type (AC/DC)AC DC
Network frequency50/60 Hz
Utilisation categoryCategory A conforming to EN/IEC 60947-2
Overvoltage categoryIV

Protection

A9F07463 — Protection
ParameterValue
Curve codeC
Trip unit technologyThermal-magnetic
Magnetic tripping limit8 x In +/- 20 %
Earth-leakage protectionSeparate block
Suitability for isolationYes conforming to EN/IEC 60947-2 Yes conforming to EN/IEC 60898-1
Limitation class3 conforming to EN/IEC 60898-1
Electrical durability (cycles)10000 cycles
Mechanical durability (cycles)20000 cycles

Mechanical

A9F07463 — Mechanical
ParameterValue
Mounting supportDIN rail
Control typeToggle
Terminal connection typeDouble terminal (top or bottom) 1...35 mm² rigid Double terminal (top or bottom) 1...25 mm² flexible
Terminal tightening torque3.5 N.m top or bottom
Wire stripping length14 mm for top or bottom connection
Contact position indicatorYes
Local signalling/indicationTrip indicator
Width72 mm
Height91 mm
Depth78.5 mm
Number of 9 mm pitches8

Environmental

A9F07463 — Environmental
ParameterValue
Operating ambient temperature-35...70 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529
Pollution degree3 conforming to EN/IEC 60947-2
Relative humidity95 % at 55 °C
Tropicalisation class2 conforming to IEC 60068-1

Approvals

A9F07463 — Approvals
ParameterValue
StandardsEN/IEC 60947-2 EN/IEC 60898-1

Product details

The Schneider Electric A9F07463 is an Acti9 iC60H miniature circuit breaker rated 63 A with a C-curve trip characteristic, 4 protected poles, and a 42 kA ultimate breaking capacity (Icu) at 12–133 V AC.

The 63 A C-curve means the magnetic trip activates at 8 x In ±20 % — roughly 504 A instantaneous — which suits moderate inrush loads like lighting banks, small motor groups, or transformer primaries without nuisance tripping. The 42 kA Icu at low voltage drops to 30 kA at 220–240 V and 15 kA at 380–415 V; that 15 kA at 400 V is the figure to coordinate with downstream branch breakers in a typical European distribution board. Overvoltage category IV and pollution degree 3 mean this breaker is rated for the main incoming supply at the service entrance — not just sub-distribution — in environments with conductive dust or humidity.

Panel integration

IP20 finger-safe terminals are standard for enclosed panels.

Frequently asked questions

Where can I buy A9F07463 and how do I get a price?

The A9F07463 is sourced and quoted to order through independent distribution against an RFQ. Submit a request for quote (RFQ) to confirm current availability and pricing — no stock count or price figure is published here.

What is A9F07463's listed depth?

The depth is 78.5 mm, which fits standard DIN-rail enclosures with a 100 mm minimum internal depth.

What compliance documentation does Schneider provide for A9F07463?

The breaker is certified to EN/IEC 60947-2 and EN/IEC 60898-1, and carries tropicalisation class 2 per IEC 60068-1. RoHS and REACH declarations are standard for the Acti9 range; consult the product documentation for specific certificates.

MPN
A9F07463