The Schneider Electric A9F07601 is an Acti9 iC60H miniature circuit breaker rated 1 A with a C-curve magnetic trip at 8 x In ±20 %, meaning it is sized for protecting a 1 A branch circuit against overload and short-circuit — the C-curve characteristic suits moderate inrush loads such as small motor starters or lighting banks where the start-up surge is not extreme. The 1P+N poles configuration provides overcurrent protection on the phase conductor and a switched neutral, common in single-phase distribution panels where the neutral is not protected but is isolated when the breaker is off. Breaking capacity is 70 kA Icu at 220...240 V AC per EN/IEC 60947-2, which means this breaker can safely interrupt a fault current up to 70 kA without welding its contacts — a high-interrupting rating for a 1 A frame, giving headroom for installation close to a transformer or in a high-fault-current panel. The same unit also carries a 10 kA Icn rating at 230 V per EN/IEC 60898-1, the standard for household and similar installations, so it is dual-certified for both industrial (60947-2) and residential/commercial (60898-1) applications.
The double-terminal design accepts 1...25 mm² rigid or 1...16 mm² flexible conductors, with a tightening torque of 2 N.m and a wire-stripping length of 14 mm.