Skip to main content
Log in
Schneider Electric A9F08113 — 1-Pole MCB (DIN Rail)

Schneider A9F08113 Acti9 iC60H MCB, 1P 13A D Curve, 42 kA

MPNA9F08113
Obsolete

Schneider Electric Acti9 iC60H miniature circuit breaker, A9F08113, 1-pole, 13 A rated current, D curve, 42 kA Icu at 12-60 VAC, DIN-rail mount.

Schneider Electric A9F08113 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9F08113 — Identification
ParameterValue
Product nameActi9 iC60
Product / component typeMiniature circuit-breaker
Product rangeActi9
Device short nameiC60H
Poles description1P
Number of protected poles1
Device applicationDistribution
A9F08113 — Electrical & Protection
ParameterValue
Rated current (In)13 A
Tripping curve codeD
Magnetic tripping limit12 x In +/- 20 %
Breaking capacity (Icu / AIR)42 kA Icu at 12...60 V AC 50/60 Hz conforming to EN/IEC 60947-2 30 kA Icu at 100...133 V AC 50/60 Hz conforming to EN/IEC 60947-2 15 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2 20 kA Icu at 12...60 V DC conforming to EN/IEC 60947-2 15 kA Icu at 60...72 V DC conforming to EN/IEC 60947-2 10000 A Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60898-1
Network type (AC/DC)DC AC
Network frequency50/60 Hz
Overvoltage categoryIV
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles
A9F08113 — Mounting & Connection
ParameterValue
Terminal connections / wire rangeDouble terminal (top or bottom) 1...25 mm² rigid Double terminal (top or bottom) 1...16 mm² flexible
Mounting supportDIN rail
Width18 mm
Height91 mm
Depth78.5 mm
Tightening torque (by circuit)2 N.m top or bottom
A9F08113 — Environmental
ParameterValue
Operating ambient temperature-35...70 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529
A9F08113 — Approvals
ParameterValue
Conformity standardsEN/IEC 60947-2 EN/IEC 60898-1
A9F08113 — Electrical
ParameterValue
[Ui] rated insulation voltage500 V AC 50/60 Hz conforming to EN/IEC 60947-2
[Uimp] rated impulse withstand voltage6 kV conforming to EN/IEC 60947-2

Product details

Schneider Electric A9F08113 is a 1-pole Acti9 iC60H miniature circuit breaker rated 13 A with a D tripping curve (12 x In magnetic trip limit, +/- 20 %). It breaks up to 42 kA Icu at 12-60 VAC 50/60 Hz per EN/IEC 60947-2, and 10 kA Icn at 230 VAC per EN/IEC 60898-1. Dual-rated to both standards, so it fits distribution boards (60898-1) and industrial panel feeders (60947-2) in the same slot.

D curve and breaking capacity

The D curve trips magnetically at 12 x In (156 A typical), which avoids nuisance trips on transformer inrush or motor starting — common on DC supply or AC drives with high capacitive charge. DC breaking capacity is 20 kA Icu at 12-60 VDC, 15 kA at 60-72 VDC, making it usable on 48 V battery banks or DC bus distribution. Rated insulation voltage is 500 VAC; overvoltage category IV suits main-panel incoming feeders. Pollution degree 3 (conductive pollution) means it holds up in industrial enclosures without conformal coating.

DIN-rail footprint and wiring

Terminals accept 1-25 mm² rigid or 1-16 mm² flexible, double terminal top and bottom for daisy-chaining. Torque to 2 N·m; strip 14 mm. IP20 finger-safe front, but the terminals need enclosure protection in wet areas.

Frequently asked questions

What is A9F08113's breaking capacity at 230 VAC?

At 230 VAC 50/60 Hz, the A9F08113 has a 10 kA Icn rating per EN/IEC 60898-1 and a 15 kA Icu rating per EN/IEC 60947-2.

What compliance standards does the A9F08113 meet?

The A9F08113 is certified to EN/IEC 60947-2 and EN/IEC 60898-1. It also carries tropicalisation class 2 per IEC 60068-1 and limitation class 3 per EN/IEC 60898-1.

Where can I buy the A9F08113?

The A9F08113 is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

MPN
A9F08113