Skip to main content
Log in
Schneider Electric A9K23116 — 1-Pole MCB (DIN Rail)

A9K23116 Acti9 iK60N MCB, 1P B-curve 16 A, 6 kA

MPNA9K23116
Active

Schneider Electric Acti9 iK60N, miniature circuit-breaker, 1P, 16 A, B curve, 6000 A Icn at 230 V AC, thermal-magnetic, clip-on DIN rail, IP20.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

A9K23116 — Identification
ParameterValue
Product nameActi9 iK60
Product / component typeMiniature circuit-breaker
Product rangeActi9
Device short nameiK60N
Poles description1P
Number of protected poles1
Device applicationDistribution
A9K23116 — Electrical & Protection
ParameterValue
Rated current (In)16 A at 30 °C
Tripping curve codeB
Magnetic tripping limit3...5 x In
Breaking capacity (Icu / AIR)6000 A Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60898-1
Network type (AC/DC)AC
Network frequency50/60 Hz
Overvoltage categoryIII
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles
A9K23116 — Mounting & Connection
ParameterValue
Terminal connections / wire rangeTunnel type terminal (top or bottom) 1...25 mm² rigid Tunnel type terminal (top or bottom) 1...16 mm² flexible
Mounting supportDIN rail
Mounting modeClip-on
Width18 mm
Height85 mm
Depth78.5 mm
Tightening torque (by circuit)2 N.m top or bottom
A9K23116 — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529
A9K23116 — Approvals
ParameterValue
Conformity standardsEN/IEC 60898-1
A9K23116 — Electrical
ParameterValue
[Ui] rated insulation voltage440 V AC 50/60 Hz conforming to EN/IEC 60898-1
[Uimp] rated impulse withstand voltage4 kV conforming to EN/IEC 60898-1

Product details

The A9K23116 is a Schneider Electric Acti9 iK60N miniature circuit-breaker — a 1-pole, 16 A, B-curve thermal-magnetic MCB rated for AC distribution per EN/IEC 60898-1. If the panel ambient runs higher, derate per the manufacturer's curve. The 440 V AC rated insulation voltage (Ui) confirms the breaker is suitable for 230/400 V networks, though the breaking capacity is declared at 230 V only.

Width is 18 mm (2 x 9 mm pitches), so it occupies one standard module position. Depth of 78.5 mm and height of 85 mm — verify enclosure depth clearance, particularly in shallow gland-plate or door-mount panels. Tunnel terminals accept 1 to 25 mm² rigid or 1 to 16 mm² flexible; tighten to 2 N·m. Strip length 14 mm.

Frequently asked questions

What is the breaking capacity of A9K23116?

The breaking capacity is 6000 A Icn at 230 V AC, 50/60 Hz, conforming to EN/IEC 60898-1. This is the maximum fault current the breaker can safely interrupt under standard test conditions.

What is the rated current and curve of A9K23116?

Rated current is 16 A at 30 °C ambient, with a B-curve (magnetic trip between 3 and 5 times In). The B-curve is suited for resistive and general-purpose loads with low inrush.

Where can I buy A9K23116?

This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

MPN
A9K23116