Skip to main content
Log in
Schneider Electric A9K23206 — 2-Pole MCB (DIN Rail)

Schneider Electric A9K23206 Acti9 iK60N MCB, 2P B-Curve 6A,

MPNA9K23206
Obsolete

Schneider Electric Acti9 iK60N, A9K23206, miniature circuit breaker, 2P, B-curve, 6 A, 6 kA Icn at 400 V AC, thermal-magnetic, DIN rail clip-on.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

A9K23206 — Identification
ParameterValue
Product nameActi9 iK60
Series / familyActi9
Device short nameiK60N
Product / component typeMiniature circuit-breaker
Device applicationDistribution
A9K23206 — Electrical
ParameterValue
Rated current [In]6 A at 30 °C
Number of protected poles2
Pole configuration2P
Network type (AC/DC)AC
Network frequency50/60 Hz
A9K23206 — Protection
ParameterValue
Tripping curve codeB
Magnetic tripping limit3...5 x In
Breaking capacity (Icu)6000 A Icn at 400 V AC 50/60 Hz conforming to EN/IEC 60898-1
Rated service breaking capacity [Ics]6000 A 100 % conforming to EN/IEC 60898-1 - 400 V AC 50/60 Hz
Energy limitation class3 conforming to EN/IEC 60898-1
Suitable for isolationYes conforming to EN/IEC 60898-1
Overvoltage categoryIII
Trip unit technologyThermal-magnetic
Earth-leakage protectionWithout
Operating / control typeToggle
Mechanical durability (cycles)20000 cycles
A9K23206 — Mechanical
ParameterValue
9 mm pitches4
Width36 mm
Height85 mm
Depth78.5 mm
Mounting supportDIN rail
Mounting modeClip-on
Terminal connectionsTunnel type terminal (top or bottom) 1...25 mm² rigid Tunnel type terminal (top or bottom) 1...16 mm² flexible
Terminal tightening torque2 N.m top or bottom
Local signalling / indicationON/OFF indication
Contact position indicatorNo
A9K23206 — Environmental
ParameterValue
Operating temperature range-25...60 °C
Storage temperature range-40...85 °C
A9K23206 — Approvals
ParameterValue
Standards / complianceEN/IEC 60898-1

Product details

The A9K23206 is a 2-pole miniature circuit breaker from the Acti9 iK60N series, rated 6 A at 30 °C with a B-curve trip characteristic (magnetic trip between 3 and 5 times In). The thermal-magnetic trip unit handles overloads (thermal bimetal) and short-circuits (solenoid) in one package, so no separate protection relay is needed for the branch circuit. Clip-on mounting to a 36 mm wide DIN-rail profile (4 module pitches at 9 mm each) means it snaps into the same panel footprint as any standard Acti9 or similar MCB.

Deployment context

This is a distribution MCB for AC branch circuits in a final sub-distribution board or consumer unit — think lighting, general-purpose socket outlets, or small motorized loads where the B-curve inrush tolerance is sufficient. The IP20 finger-safe terminals suit enclosed panel installation; the toggle actuator gives local ON/OFF indication and accepts a padlocking device for lockout/tagout during maintenance.

Frequently asked questions

What is the breaking capacity of A9K23206?

The A9K23206 is rated for 6000 A Icn at 400 V AC 50/60 Hz conforming to EN/IEC 60898-1, which is the standard fault-interruption rating for this class of miniature circuit breaker.

What standards does A9K23206 comply with?

It is certified to EN/IEC 60898-1, with a limitation class of 3, pollution degree 2, and overvoltage category III. The suitability for isolation is also confirmed per that standard.

Where can I buy A9K23206 and how is it quoted?

This part is sourced and quoted to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at the time of quote — submit an RFQ for a firm commitment.

MPN
A9K23206