Skip to main content
Log in
Schneider Electric A9K23432 — Circuit Breaker Accessories

A9K23432 Acti9 iK60N MCB, 4P, 32 A, Curve B, 6 kA

MPNA9K23432
Obsolete

Schneider Electric Acti9 iK60N miniature circuit-breaker, A9K23432, 4P, 32 A rated, B-curve, 6 kA Icn at 400 V AC, clip-on DIN rail, thermal-magnetic trip.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

A9K23432 — Identification
ParameterValue
Product / component typeMiniature circuit-breaker
Product nameActi9 iK60
Product rangeActi9
Device applicationDistribution
A9K23432 — Electrical
ParameterValue
Network type (AC/DC)AC
Rated current [In]32 A at 30 °C
Rated insulation voltage [Ui]440 V AC 50/60 Hz conforming to EN/IEC 60898-1
Rated impulse withstand voltage [Uimp]4 kV conforming to EN/IEC 60898-1
Network frequency50/60 Hz
Poles description4P
Magnetic tripping limit3...5 x In
A9K23432 — Protection & Performance
ParameterValue
Breaking capacity6000 A Icn at 400 V AC 50/60 Hz conforming to EN/IEC 60898-1
Rated service breaking capacity [Ics]6000 A 100 % conforming to EN/IEC 60898-1 - 400 V AC 50/60 Hz
Trip unit technologyThermal-magnetic
Earth-leakage protectionWithout
Suitability for isolationYes conforming to EN/IEC 60898-1
Mechanical durability20000 cycles
Electrical durability10000 cycles
Local signallingON/OFF indication
Contact position indicatorNo
A9K23432 — Mechanical
ParameterValue
Connections / terminalsTunnel type terminal (top or bottom) 1...25 mm² rigid Tunnel type terminal (top or bottom) 1...16 mm² flexible
Device short nameiK60N
Control typeToggle
Mounting modeClip-on
Mounting supportDIN rail
Usable 9 mm pitches8
Width72 mm
Height85 mm
Depth78.5 mm
ColourWhite
A9K23432 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to IEC 60529
Pollution degree2 conforming to EN/IEC 60898-1
Operating ambient air temperature-25...60 °C
Storage ambient air temperature-40...85 °C
A9K23432 — Approvals
ParameterValue
StandardsEN/IEC 60898-1
A9K23432 — Specifications
ParameterValue
Curve codeB
Number of protected poles4

Product details

The Schneider Electric A9K23432 is a 4-pole miniature circuit-breaker (MCB) from the Acti9 iK60N series, rated 32 A at 30 °C with a B-curve trip characteristic (magnetic trip between 3 and 5 times In). That B-curve means it's sized for resistive and light inductive loads — lighting, small heaters, general-purpose distribution — where inrush isn't severe. The thermal-magnetic trip unit combines a bimetal strip for overload protection and a solenoid for short-circuit response.

The 4-pole format occupies the full width; plan your enclosure rail space accordingly — 8 x 9 mm = 72 mm, leaving no room for a half-module neighbour. Tunnel-type terminals accept 1…25 mm² rigid or 1…16 mm² flexible cable; tighten to 3.5 N·m. The toggle provides local ON/OFF indication; a padlocking device can be fitted for lockout/tagout.

Frequently asked questions

What is the breaking capacity of A9K23432?

6 kA Icn at 400 V AC 50/60 Hz per EN/IEC 60898-1.

What is the closest alternative to A9K23432 in the same family?

Within the Acti9 iK60N range, the same 4-pole B-curve format is available in other current ratings (e.g., 16 A, 20 A, 40 A). The deciding factor is the 32 A load requirement — no pin-compatible substitute exists because the rating itself governs the trip calibration.

Where can I buy A9K23432 and get current pricing?

Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

MPN
A9K23432