Skip to main content
Log in
Schneider Electric A9K23632 — 1-Pole MCB (DIN Rail)

Schneider Electric A9K23632 Acti9 iK60N MCB, 32 A, Curve B,

MPNA9K23632
Obsolete

Schneider Electric Acti9 iK60N miniature circuit breaker, A9K23632, 32 A rated current, curve B, 1P+N, 6 kA breaking capacity at 230 V AC, EN/IEC 60898-1, DIN rail clip-on.

Schneider Electric A9K23632 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9K23632 — Identification
ParameterValue
Product nameActi9 iK60
Product / component typeMiniature circuit-breaker
Product rangeActi9
Device short nameiK60N
Poles description1P + N
Number of protected poles1
Device applicationDistribution
A9K23632 — Electrical & Protection
ParameterValue
Rated current (In)32 A at 30 °C
Tripping curve codeB
Magnetic tripping limit3...5 x In
Breaking capacity (Icu / AIR)6000 A Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60898-1
Network type (AC/DC)AC
Network frequency50/60 Hz
Overvoltage categoryIII
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles
A9K23632 — Mounting & Connection
ParameterValue
Terminal connections / wire rangeSingle terminal (top or bottom) 1...35 mm² rigid
Mounting supportDIN rail
Mounting modeClip-on
Width36 mm
Height85 mm
Depth78.5 mm
Tightening torque (by circuit)3.5 N.m top or bottom
A9K23632 — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529
A9K23632 — Approvals
ParameterValue
Conformity standardsEN/IEC 60898-1
A9K23632 — Electrical
ParameterValue
[Ui] rated insulation voltage440 V AC 50/60 Hz conforming to EN/IEC 60898-1
[Uimp] rated impulse withstand voltage4 kV conforming to EN/IEC 60898-1

Product details

The thermal-magnetic trip unit responds to overloads and short circuits; magnetic tripping occurs between 3 and 5 times the rated current, so it clears fast on high-impedance faults without nuisance trips on moderate inrush from lighting or resistive loads.

The toggle actuator provides local ON/OFF indication. Terminals accept 1 to 35 mm² rigid wire; strip 14 mm and tighten to 3.5 N.m. The 78.5 mm depth leaves clearance in shallow enclosures, though the 85 mm height may crowd a 4-row cabinet if busbar routing is tight.

Rated breaking capacity is 6000 A Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60898-1.

Frequently asked questions

What compliance standards does the A9K23632 meet?

The A9K23632 conforms to EN/IEC 60898-1 for miniature circuit breakers, with an insulation voltage of 440 V AC and overvoltage category III. It carries IP20 finger protection per IEC 60529.

MPN
A9K23632