Skip to main content
Schneider Electric A9K23650

Schneider Electric A9K23650 Acti9 iK60N MCB, 50 A, Curve B,

MPN A9K23650
Obsolete

Schneider Electric Acti9 iK60N, miniature circuit breaker, A9K23650, 50 A, curve B, 1P+N, 6 kA, DIN rail.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9K23650 key specifications
ParameterValue
Control typeToggle
Trip unit typeThermal-magnetic
Main product or component typeMiniature circuit-breaker
Insulation voltage ui440 V AC 50/60 Hz conforming to EN/IEC 60898-1
Breaking capacity6000 A Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60898-1
IP ratingIP20
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...85 °C
Pollution degree2 conforming to EN/IEC 60898-1

All specifications

A9K23650 additional specifications
ParameterValue
ColorWhite
Depth78.5 mm
Width36 mm
Height85 mm
Electrical life cycles10000 cycles
Mechanical life cycles20000 cycles
ApplicationDistribution
Operating temperature-25...60 °C

Product details

The Schneider Electric A9K23650 is a 50 A, curve B, 1P+N miniature circuit breaker from the Acti9 iK60N series, rated for 6 kA breaking capacity at 230 V AC per EN/IEC 60898-1.

In a panel with multiple breakers ganged together, derate per the manufacturer's table — typically 10–15 % if the ambient exceeds 40 °C or if the breaker is sandwiched between loaded units. For installations where the prospective short-circuit current (PSCC) at the breaker's location exceeds 6 kA, you need a higher-rated device upstream or a current-limiting fuse. The limitation class 3 rating means this breaker limits let-through energy to a level that protects downstream equipment during a fault. The 1P+N configuration switches the phase and switches the neutral, but the neutral pole is not protected — it opens and closes with the phase but does not have an overcurrent trip element. This is common in single-phase final distribution where the neutral is solidly bonded at the panel. The neutral position is left, which matters when aligning busbar connections in a multi-pole assembly.

The 36 mm width (4 modules) fits standard distribution board cutouts. Terminals accept 1 to 35 mm² rigid wire; strip 14 mm and torque to 3.5 N·m. The toggle actuator provides local ON/OFF indication. A padlocking device can be fitted to lock the breaker in the OFF position for lockout/tagout procedures.

MPN
A9K23650