Skip to main content
Log in
Schneider Electric A9K24650 — 1-Pole MCB (DIN Rail)

A9K24650 Acti9 iK60N MCB, 1P+N, C-curve, 50 A, 6 kA

MPNA9K24650
Active

Schneider Electric Acti9 iK60N, A9K24650, miniature circuit breaker, 1P+N, C-curve, 50 A, 6000 A Icn at 230 V AC, EN/IEC 60898-1.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9K24650 — Identification
ParameterValue
Product nameActi9 iK60
Product / component typeMiniature circuit-breaker
Product rangeActi9
Device short nameiK60N
Poles description1P + N
Number of protected poles1
Device applicationDistribution
A9K24650 — Electrical & Protection
ParameterValue
Rated current (In)50 A at 30 °C
Rated operational voltage (Ue)230 V AC 50/60 Hz
Tripping curve codeC
Magnetic tripping limit5...10 x In
Breaking capacity (Icu / AIR)6000 A Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60898-1
Network type (AC/DC)AC
Network frequency50/60 Hz
Overvoltage categoryII
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles
A9K24650 — Mounting & Connection
ParameterValue
Terminal connections / wire rangeTunnel type terminal (top or bottom) 1...35 mm² rigid Tunnel type terminal (top or bottom) 1...25 mm² flexible
Mounting supportDIN rail
Mounting modeClip-on
Width36 mm
Height85 mm
Depth78.5 mm
Tightening torque (by circuit)3.5 N.m top or bottom
A9K24650 — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20 conforming to IEC 60529
A9K24650 — Approvals
ParameterValue
Conformity standardsEN/IEC 60898-1
A9K24650 — Electrical
ParameterValue
[Ui] rated insulation voltage440 V AC 50/60 Hz conforming to EN/IEC 60898-1
[Uimp] rated impulse withstand voltage4 kV conforming to EN/IEC 60898-1

Product details

The C-curve means the magnetic trip fires between 5 and 10 times the rated current (250–500 A for this 50 A unit), so it's sized for inductive loads like small motors and lighting banks where inrush is moderate. The 1P+N configuration switches the line and switches the neutral but does not protect it — the neutral is left solid.

Clip-on DIN rail mount, 36 mm wide (4 x 9 mm pitches). Tunnel terminals accept 1...35 mm² rigid or 1...25 mm² flexible; strip 14 mm and torque to 3.5 N.m. Neutral is on the left. Padlocking device available for lockout/tagout.

Frequently asked questions

What is A9K24650's listed depth?

The depth is 78.5 mm.

What is A9K24650's listed range?

The range is Acti9.

MPN
A9K24650