Skip to main content
Log in
Schneider Electric A9N16240 — Residual Current Breakers (RCCB/RCBO)

Schneider Electric A9N16240 Acti9 xID RCCB, 63 A, 30 mA, 2P

MPNA9N16240
Active

Schneider Electric Acti9 xID RCCB, 2P, 63 A, 30 mA, Type A-SI, 230-240 V AC, clip-on DIN rail.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

A9N16240 — Residual Current Protection
ParameterValue
Earth-leakage sensitivity (IΔn)30 mA
Earth-leakage protection class / typeType A-SI (Super Immunised)
Earth-leakage trip time delayInstantaneous
Local signalling / indicationON, OFF, fault trip
A9N16240 — Electrical Ratings
ParameterValue
Rated current (In)63 A
Rated operational voltage (Ue)230...240 V AC 50 Hz
Poles description2P
Neutral pole positionLeft
Network typeAC
Network frequency50 Hz
Rated insulation voltage (Ui)500 V AC 50 Hz
Rated impulse withstand voltage (Uimp)6 kV
Electrical durability4000 cycles
Mechanical durability (operating cycles)4000 cycles
A9N16240 — Identification
ParameterValue
Product nameActi9 xID
Product / component typeResidual current circuit breaker (RCCB)
Product range / familyActi9
Device short namexID
A9N16240 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Control typeToggle
Width in 9 mm modules4
Terminal connectionsTunnel type terminals (top or bottom) 1...35 mm² rigid Tunnel type terminals (top or bottom) 1...25 mm² flexible
Wire stripping length14 mm for top or bottom connection
Terminal tightening torque3.5 N.m top or bottom
Width36 mm
Height81 mm
Depth75 mm
A9N16240 — Environmental
ParameterValue
Operating ambient temperature-5...40 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20
Pollution degree2
Relative humidity95 % at 55 °C
Tropicalisation2 conforming to IEC 60068-1
A9N16240 — Approvals
ParameterValue
StandardsEN/IEC 61008-1 EN 61008-2-1 IEC 61008-2-1

Product details

The Schneider Electric A9N16240 is a 2-pole residual current circuit breaker (RCCB) from the Acti9 xID range, rated 63 A with 30 mA earth-leakage sensitivity.

Earth-leakage protection class and what it means

The A9N16240 carries a Type A-SI (Super Immunised) earth-leakage protection class. This makes it suitable for circuits feeding electronic loads where a standard Type A would trip falsely. The 30 mA sensitivity is the standard for personal protection against indirect contact (IEC 60364). Instantaneous trip time means no intentional delay — it clears the fault as soon as the residual current exceeds 30 mA.

Tunnel terminals accept 1-35 mm² rigid or 1-25 mm² flexible cable; strip length 14 mm, tighten to 3.5 N·m. IP20 rated — intended for enclosed distribution boards, not wet or dusty environments. Local signalling shows ON, OFF, and fault-trip status. A padlocking device can lock the toggle in the OFF position for isolation during maintenance — the part is marked suitable for isolation.

Frequently asked questions

Where can I buy the A9N16240?

The A9N16240 is sourced and quoted to order against an RFQ through independent distribution; availability and current pricing are confirmed at quote time.

What is the earth-leakage protection class of the A9N16240?

The A9N16240 is Type A-SI (Super Immunised), detecting sinusoidal AC and pulsating DC fault currents while immunised against nuisance tripping from high-frequency leakage up to 1 kHz.

What are the key ratings of the A9N16240?

Rated current 63 A, earth-leakage sensitivity 30 mA, rated operational voltage 230-240 V AC 50 Hz, breaking capacity 630 A per EN/IEC 61008-1.

MPN
A9N16240