Skip to main content
Log in
Schneider Electric A9N19533 — Residual Current Breakers (RCCB/RCBO)

Schneider Electric A9N19533 Acti9 DPN Vigi RCBO, 13 A C-Curv

MPNA9N19533
Obsolete

Schneider Electric Acti9 DPN Vigi RCBO, A9N19533, 1P+N, 13 A, C-curve, 30 mA, 4.5 kA, DIN rail.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9N19533 — Residual Current Protection
ParameterValue
Earth-leakage sensitivity (IΔn)30 mA
Earth-leakage protection class / typeType A
Earth-leakage trip time delayInstantaneous
Residual-current tripping technologyVoltage independent
Trip unit technologyThermal-magnetic
Local signalling / indicationON, OFF, fault trip
A9N19533 — Electrical Ratings
ParameterValue
Rated current (In)13 A
Rated operational voltage (Ue)220...240 V AC 50/60 Hz
Poles description1P + N
Neutral pole positionLeft
Network typeAC
Network frequency50/60 Hz
Rated insulation voltage (Ui)400 V AC 50/60 Hz
Rated impulse withstand voltage (Uimp)4 kV
Overvoltage categoryIII conforming to IEC 60364
Device location in systemOutgoer
Electrical durability20000 cycles
Mechanical durability (operating cycles)20000 cycles
A9N19533 — Identification
ParameterValue
Product nameActi9 DPN Vigi
Product / component typeResidual current breaker with overcurrent protection (RCBO)
Product range / familyActi9
Device short nameDPNa Vigi
A9N19533 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Control typeToggle
Width in 9 mm modules4
Terminal connectionsTunnel type terminal top or bottom 0.75...16 mm² rigid Tunnel type terminal top or bottom 0.33...10 mm² flexible Tunnel type terminal top or bottom 0.33...10 mm² flexible with ferrule
Wire stripping length15 mm for top or bottom connection
Terminal tightening torque2 N.m top or bottom
Width36 mm
Height81 mm
Depth77.5 mm
A9N19533 — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-30...70 °C
IP degree of protectionIP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
Pollution degree3
Relative humidity90 % at 55 °C
Tropicalisation2 conforming to IEC 60068-1
A9N19533 — Approvals
ParameterValue
StandardsEN/IEC 61009-2-1

Product details

The 4.5 kA breaking capacity at 220…240 V AC (EN/IEC 61009-2-1) covers typical domestic and light commercial distribution boards. Clip it onto a DIN rail, land the phase and neutral on the tunnel terminals (up to 16 mm² rigid), and the integrated RCD saves a separate module's worth of rail space.

The 13 A rated current (In) and C-curve mean this RCBO holds the circuit under normal load but trips magnetically between 5 and 10 times In — so a 65 A to 130 A fault clears fast enough to protect the cable and the connected loads.

Width is 36 mm — that's 4 standard 9 mm pitches on a DIN-rail board. Tunnel terminals accept 0.75…16 mm² rigid or 0.33…10 mm² flexible (with or without ferrule); strip length is 15 mm, tightening torque 2 N·m. The toggle gives ON/OFF/trip indication, and the IP20 rated enclosure (IP40 in a modular enclosure) keeps it safe inside a distribution cabinet. 20,000 cycles each mechanical and electrical durability matches the service life of a typical final circuit breaker.

Frequently asked questions

Where can I buy the A9N19533?

Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

What is the A9N19533's breaking capacity?

4,500 A Icn at 220…240 V AC, 50/60 Hz, conforming to EN/IEC 61009-2-1.

What compliance documentation does this RCBO carry?

Certified to EN/IEC 61009-2-1. Tropicalisation class 2 per IEC 60068-1. Pollution degree 3, overvoltage category III. IP20 (IP40 in modular enclosure).

MPN
A9N19533