Skip to main content
Log in
Schneider Electric A9N1P10DIN — 1-Pole MCB (DIN Rail)

Schneider Electric A9N1P10DIN Acti9 MCB, 10 A D Curve, 1P, 1

MPNA9N1P10DIN
Active

Schneider Electric Acti9 xC60 miniature circuit breaker, A9N1P10DIN, 1-pole, 10 A rated, D curve, 10 kA breaking capacity at 240 V AC, clip-on 35 mm DIN rail mount.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

A9N1P10DIN — Identification
ParameterValue
Product nameXC60
Product / component typeMiniature circuit-breaker
Product rangeActi9
Device short namexC60
Poles description1P
Number of protected poles1
Device applicationDistribution
A9N1P10DIN — Electrical & Protection
ParameterValue
Rated current (In)10 A
Rated operational voltage (Ue)220...240 V AC 50/60 Hz 12...48 V DC 60 V DC
Tripping curve codeD
Magnetic tripping limit12 x In +/- 20 %
Breaking capacity (Icu / AIR)10 kA Icu at 220...240 V AC 50/60 Hz conforming to IS/IEC 60947-2 15 kA Icu at 12...48 V DC conforming to IS/IEC 60947-2 6 kA Icu at 60 V DC conforming to IS/IEC 60947-2
Network type (AC/DC)AC DC
Network frequency50/60 Hz
Overvoltage categoryIV
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles
A9N1P10DIN — Mounting & Connection
ParameterValue
Terminal connections / wire rangeTunnel type terminals (bottom) 16 mm² flexible Tunnel type terminals (bottom) 25 mm² rigid Biconnect (bottom)
Mounting support35 mm DIN rail
Mounting modeClip-on
Width18 mm
Height85 mm
Depth77.5 mm
Tightening torque (by circuit)2 N.m
A9N1P10DIN — Environmental
ParameterValue
Operating ambient temperature-30...70 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20
A9N1P10DIN — Approvals
ParameterValue
Conformity standardsIS/IEC 60947-2
A9N1P10DIN — Electrical
ParameterValue
[Ui] rated insulation voltage500 V AC 50/60 Hz conforming to IS/IEC 60947-2
[Uimp] rated impulse withstand voltage4 kV conforming to IS/IEC 60947-2

Product details

The Schneider Electric A9N1P10DIN is a 1-pole Acti9 xC60 miniature circuit breaker rated 10 A with a D trip curve. Breaking capacity is 10 kA Icu at 220…240 V AC (IS/IEC 60947-2), 15 kA at 12…48 V DC, and 6 kA at 60 V DC.

Mounts via clip-on to 35 mm DIN rail. Tightening torque 2 N·m. Wire strip length 13 mm for top or bottom connection. IP20 finger-safe protection. Pollution degree 3 (industrial environment). Overvoltage category IV — suitable for main incoming panels, not just sub-circuits. Suitability for isolation confirmed per IS/IEC 60947-2.

Thermal-magnetic trip unit. Electrical and mechanical durability rated at 20,000 cycles each. Limitation class 3 per IS/IEC 60947-2 — energy let-through is limited, aiding downstream device coordination. Earth-leakage protection via separate block (not integral).

Frequently asked questions

What is the breaking capacity of A9N1P10DIN?

10 kA Icu at 220…240 V AC, 15 kA at 12…48 V DC, and 6 kA at 60 V DC, all per IS/IEC 60947-2.

What does the D curve mean on this MCB?

The D curve magnetic trip operates at 12 x In ±20 %, so it allows high inrush currents without nuisance tripping — suited for motor, transformer, and discharge lighting circuits.

Where can I buy A9N1P10DIN?

This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at the time of quote.

What compliance standards does A9N1P10DIN meet?

It complies with IS/IEC 60947-2, with tropicalisation class 2 per IEC 60068-1 and limitation class 3 per IS/IEC 60947-2.

MPN
A9N1P10DIN